1. First, take out the prop model workbench, make a 3×3 plane on the palm of the prop model workbench, and then extend upward to the height of 12 grid. Then make a 5×5×5 entity on the basis of the previous one. On the previous entity, make a 7×7 plane on the plane parallel to the hand, with a thickness of 2, and do the same for his face. Then go to the previous step.

2. First, take out the prop model workbench, make a 3×3 plane on the palm of the prop model workbench, and then extend upward to the height of 12 grid. Then make a 5×5×5 entity on the basis of the previous one. On the previous entity, make a 7×7 plane on the plane parallel to the hand, with a thickness of 2, and do the same for his face.

3. Put 5 pieces of yellow hard sand behind the palm of your hand. Extend three yellow hard sand blocks outward by two squares. Then extend one of the yellow hard sand blocks outward by two squares and knock off one yellow hard sand block. And put a blue hard sand block under the yellow hard sand block. The same is true for the other three corners.

4. Then knock off the flat rock, and there will be four in one * * *. Extend the lower column downward by 14 grids.

5. Surround the bottom layer of red hard sand with yellow hard sand. On the basis of yellow hard sand, build a cross with five yellow hard sand, and finally put a yellow hard sand in the middle of the cross. Such a sky hammer will certainly do it.