Hold the key head under the bottle cap with your usual hand, and then turn the key upward to loosen the bottle cap. You may need to rotate the bottle, and then repeat this action until the cap falls off completely.

For metal spoons or forks, just put the edge of the spoon under the lid, and then pry the spoon up hard until the bottle cap opens. Alternatively, you can pry open the bottle cap by holding the end of the spoon handle.

2, lighters, lipsticks and other angular solid objects

Hold the bottleneck of the beer bottle with one hand, leaving enough space to put the lighter between the bottle cap and your index finger holding the bottle body. Now push up from the other end of the lighter with your other hand until the cover falls off.

3. another bottle

Although this seems to be an old method, it does work. Just a little trick: turn the first bottle of wine upside down and open the bottle cap of another bottle with the edge of its bottle cap. Hold these two bottles of wine firmly.

4. Door frame

You need to tilt the beer bottle slightly to match the work. Fasten the edge of the bottle cap on the edge of the door frame, and use force at right angles to pry the bottle cap open under the action of the lever.

5. paper

It may sound incredible, but it can be successful. Fold your paper several times (to make it thick enough), then put it under the bottle cap and pry it open.

6. Dining table

Or bricks, or any tabletop with contoured edges. Put the bottle cap on the edge of the table, and it will be clamped firmly. Then, hammer the bottle cap down with hands or heavy objects, so that the edge of the bottle cap will bounce and open successfully.

7. ring

Put your hand on the top of the bottle cap, and the ring will catch the lower edge of the bottle cap to form a pull ring. Tilt the bottle at an angle of 45 degrees, then clamp the top of the bottle cap, pull up the ring and pull out the bottle cap. Your ring had better be a stable titanium alloy or pure gold.

8, scissors

There are actually two strategies. The first is to open the scissors, put the bottle cap between the two blades, clamp it and push it up to make the bottle cap fall off. Another method is to cut the metal edge of the bottle cap with scissors until it falls off.