bill of materials
The materials required for DIY door paint are: polyester or polyurethane paint, 360 # and 600 # water sandpaper, putty powder and wool brush.
operation sequence/order
1. Use 360 water sandpaper to polish the door panel to remove stains and impurities. If there is peeling, gently scrape it off with a putty knife, clean it, and apply the first paint.
2. After the first paint is dry, sand it again, and then apply the second paint.
3. Repeat the above steps, this time polishing with 600 water sandpaper. The whole process will take about three days, so wait patiently!
skill
1. Please paint in a well-ventilated environment to avoid inhaling harmful substances.
2. Don't touch the paint during drying to prevent poisoning.