If you can't buy it, I suggest changing it. If you buy it for a while, you can replace it as follows.

How to remove the handle of electric kettle and prepare tools;

Phillips screwdriver

Specific steps:

1. First, there are three screws on the base. Note that there is a screw under the certificate. Remove the screws. There is a screw on the handle near the base, which is also unscrewed by a screwdriver. 3. Open the lid. There are two screws on the handle. When unscrewed, it will be removed.

Extended data:

principle of operation

After the electric kettle is connected to the power supply for about 5 minutes, the steam deforms the bimetal of the steam temperature sensing element and pushes the switch contact to disconnect the power supply.

If the steam switch fails, the water in the kettle will burn until it is dry, and the temperature of the heating element will rise sharply. There are two bimetals at the bottom of the heating plate, which will rise sharply due to heat conduction, expand and deform, and disconnect the power supply. Therefore, the safety protection device of electric kettle is designed very scientifically and reliably. This is the triple safety protection principle of electric kettle.