1, EVA edge sealing technology
EVA edge sealing is mainly done by hot melt adhesive. When this kind of edge sealing meets high temperature, it is easy to crack and overflow, and the glue line is obvious, which is easy to appear black. Not suitable for light-colored plates, kitchen and other high-temperature places should be carefully selected. EVA edge sealing is more affordable, and it is the standard of small workshops, and its environmental protection is relatively poor. But at present, 80% of cabinets on the market are hot-melt edge sealing, and pur and laser are only a few.
2.PUR edge sealing technology
PUR glue is moisture-cured, and will not be cracked due to the influence of temperature, with high aesthetics. Because PUR glue reacts with air moisture to cure after heating, there is no need to worry about melting when reheating, and the stability is better. Now the PUR edge sealing factory has been popularized, and the edge sealing technology will become more and more mature.
3. Laser edge sealing technology
Laser edge sealing technology adopts special edge sealing tape, which is environmentally friendly, non-adhesive, high flatness and more beautiful. Its back has its own "laser photosensitive activating substance", and the coating is activated after the laser reaches a high temperature instantly, reaching a state similar to welding. However, the cost of laser edge banding machine is very high, which is not affordable for ordinary factories. So only a few well-known brands or brands that take the high-end route use it.
Matters needing attention in choosing wardrobe
1, wardrobe board
First of all, when we buy the whole wardrobe brand, we must first understand the material of the wardrobe and whether the plate of the wardrobe is firm or not, which directly determines the service life of the whole wardrobe. At present, the standard plate thickness on the market is 18mm, which will be more durable and the service life will reach 15 years or more. Of course, you can thicken it if you want, but the price will definitely be higher. And when we choose plates, we should also look at whether the plates are environmentally friendly, because environmental protection is directly related to the health of our families.
2. Wardrobe technology
After reading the plate of the wardrobe, look at the overall technology of the wardrobe. Fine workmanship in the wardrobe is very important. First look at the edge of the board. Generally, the edge sealing of the machine is relatively uniform, and there are no black lines and sawtooth marks. However, manual edge sealing will be a bit rough, which will hurt clothes, especially expensive silk fabrics. The other is to look at the back panel of the wardrobe to see whether the back panel is slotted and installed to ensure stability.