1. Unplug the power cord from the power socket first to avoid short circuit or other hazards. Before disassembling the base, be sure to pour out the water in the health pot to avoid water splashing on the circuit board and damaging the electrical appliances.

2. Turn the pan over, find the fixing screw under the base and loosen it with a screwdriver. Gently remove the base from the incubator body, taking care not to damage the interface between them.

3. If it is necessary to further clean or overhaul the inside of the health care pot, the filter screen and other components in the health care pot can be removed. It should be noted that when removing the base, care should be taken to avoid damaging the internal components of the health pot. If you are not sure about the operation method, it is recommended to consult a professional or contact the after-sales service of the health pot.