Doctor induction cooker is a high-tech kitchen appliance, which has the advantages of safety, environmental protection and energy saving, and is favored by many consumers in daily use. However, in the process of long-term use, some fault problems will also be encountered. The following are the common fault codes and solutions of Dr. Induction Cooker:

1.E0 wake-up mode: no induction cooker is used, the power supply is not plugged in tightly or the interface of the power control panel is poorly contacted. Solution: Unplug the power plug and check the wiring of the control panel.

2.E 1 power supply voltage: the power supply voltage is abnormal. Solution: Check whether the power supply voltage is stable.

3.E2 power adjustment: The induction cooker is not adjusted to the correct power. Solution: Adjust the correct power.

4.E3 leakage fault: the leakage protection device of induction cooker operates. Solution: Plug in the power plug and confirm whether the induction cooker is placed on the dry ground.

5.E4 overheating fault: the temperature of the induction cooker is too high. Solution: Start the furnace again after cooling.

6.E5 short circuit fault: the signal line is short-circuited. Solution: Check whether the signal wire is connected correctly.

7.7 communication failure. E6 control panel: communication between control panel and display panel is abnormal. Solution: Check whether the connection between the control panel and the display panel is normal.

8.E7 overcurrent fault: the current of induction cooker is too large. Solution: Check whether the items in the furnace are too heavy or too large.

The above are the common fault codes and solutions of Dr. Induction Cooker. In case of failure due to other reasons, it is recommended to contact professional maintenance personnel for maintenance as soon as possible.