The water leakage problem of the health pot may be caused by the damage or incorrect installation of the sealing ring. I suggest you take the following steps to solve this problem:

1. Check the sealing ring: First, turn the pot upside down and check the sealing ring. If the sealing ring is damaged or deformed, it needs to be replaced with a new one.

2. Clean the sealing ring and installation area: If the sealing ring is not obviously damaged, it can be removed and cleaned to ensure that it is free of grease or impurities. Then, clean the installation area of the incubator to remove any dirt or residue.

3. Correct installation of sealing ring: Ensure that the sealing ring is correctly placed in the installation area of the curing pot. Make sure that the sealing ring fits perfectly and is not curled or skewed. Tighten the upper cover or parts of the health pot to ensure sealing.

If the above methods still can't solve the water leakage problem, you may need to consult relevant professional maintenance services or contact the manufacturer of health pot for more help.

These suggestions are given according to the general situation of the health pot. The specific situation may be different. Please follow the operating instructions of the incubator or contact the manufacturer for more accurate guidance.