Driving in neutral means that the driver will change the gear to neutral, use inertia to slide until the speed of the car is reduced to a certain extent, and then hang up the middle and high-grade fuel supply, and continue this practice to achieve the purpose of energy saving. In many transmissions, the transmission of driving force is interrupted, and the automobile engine is still an oil pump to keep the waiting speed. At this time, the fuel consumption is the amount of fuel injected to maintain the waiting speed, so it is relatively low. If the speed is not fast, you can slide in neutral within your control range.
The right leg collects oil, and the van slips away and rushes up from the narrow left lane. I was sweating at that time. During a rainstorm, I was too close to the car, and the car behind the right lane suddenly slowed down. There was a deviation in precipitation at that time. Drivers usually habitually put the gear into neutral and use the inertia force of the car to move forward. When it comes to the selection of Henan Opera, they gently brake to stop the car. The purpose is to make the car more fuel-efficient. Neutral sliding fuel-efficient refers to the automobile engine car (oil-melting disc) more than ten years ago, so it is not a master or a great god; Downhills include steep slopes and slopes. When taxiing in neutral, the speed is very safe, as long as you keep it within the speed that can be put into gear. This is the same as having to downshift when taxiing. You can learn about the engine condition of the car first, otherwise it will be miserable in case of flameout! Because the lubrication mode of manual transmission is splash, the damage of sliding to transmission is ignored.