1. The treadmill can't start or stop suddenly.
This is the most common treadmill failure. It may be a power failure or a power switch problem. First, check whether the power plug is plugged tightly and whether the power cord is not disconnected or damaged. Then, check whether the power switch is in the correct position. It may also be caused by improper pedal position or machine overload.
2. The vibration or noise of the treadmill is too large.
This may be due to the treadmill not being installed correctly or not lying flat on the ground. Before using the treadmill, please ensure that it is placed on a flat ground and the screws and nuts of the treadmill are installed correctly according to the manufacturer's instructions. It may also be caused by motor or transmission system failure.
3. The treadmill displays unclear or wrong information.
This may be due to the failure of keys or monitors on the treadmill control panel. First, please make sure that the treadmill is powered on. Then, before using the treadmill, please make sure that the control panel and circuit board are not exposed to liquid or moisture.
4. The stage of the treadmill.
Periodic problems in the use of treadmills may be caused by the high load of circuit boards. In this case, you should stop using it immediately and wait for a while before using it for inspection. It may also be that the fault degree is relatively minor and no problems or omissions are detected. It is recommended to contact the after-sales service for maintenance inspection, and have the work records of the maintenance personnel, and check the running situation of the treadmill at any time to see if there is any problem.
In a word, the treadmill is a machine that needs some maintenance, which can provide effective physical exercise, but it needs to pay attention to details to keep the fitness equipment clean, stable and smooth.