1, knitting a small slim sweater, which requires 6-6.5 inches from top to bottom;

2, weaving a long slim sweater, weaving from top to bottom needs to be woven about 7 inches;

3. If you are knitting a loose sweater, or you are fat, you need to lengthen 1- 1.5 inches from top to bottom.

The knitting size of the back piece of the jacket is calculated as follows

1, starting from the bottom =( 1/2 bust-1 cm) × transverse density+sewing loss (needle)

2. Line length = (length-bottom rib) × linear density

3, the number of long body lines = (body length-bottom bar-hanging shoulder) × straight density

4. The number of stitches in shoulder width = shoulder width × consumption of transverse seam (number of stitches)

5. Total number of hanging shoulders = hanging shoulder length × straight density

Extended data:

The knitting size of the front piece of the jacket is calculated as follows

1, starting from the bottom =( 1/2 bust+1 cm) × transverse density+sewing loss (needle)

2. The number of long body lines is the same as that of the back panel "2".

3. The length of the front body is the same as that of the back film "3".

4. The number of shoulder width stitches is the same as that of the back piece "4".

5. The total number of hanging shoulders is the same as "5" in the back panel.

6. The number of stitches received by hanging shoulder is the same as that of the back piece "6".

7. Shoulder-hanging needle collection method: It can be compared with the back film, but the front film is more than the back film 1 cm, and the needle collection is more than the back film. The number of stitches that can be collected during flat collection 1 cm.

References:

Baidu encyclopedia-sweater