1。 Create a new gray image, taking 340x 120 as an example. Set the background to white and the foreground to black. The font of the text should be thicker, so the effect is better. 2. Select the text and press CtrlShiftI to flip the selected area. After leveling the layer, select Filter/Pixel/Lattice Settings 10.
3. Select/reverse; The filter/noise/additive noise parameter is 70/ Gaussian distribution.
4. Filter/Blur/Gaussian Blur with radius of 2.0.
5. Use Image/Adjustment/Curve to process the image and set the parameters as follows. (I know this)
6. Remove the selection range and select image/adjustment/inversion; Image/rotate the canvas clockwise/90; Filtering/Stylization/Wind ... (from left); Image/counterclockwise/90 rotation canvas; Image/mode /RGB color; Image/Adjustment/Tone Saturation ... Select a color and set the tone to-175.
7. Click the right arrow in the brush panel, load the mixed brush, and use the brush tool to point some bright spots.
How to shoot the camera jelly effect?
Generally, it can't be solved, and it needs a higher shutter or a higher progressive scanning speed. For things that move too fast, you can take one or several static pictures and then ps.
How to make jelly-like essential oil soap?
It's not the height of coconut trees, it's soft and oily, and it's easy to melt, but your soap is after jelly reaction, so the soap on it is QQ and soft after absorbing water.
It is a very nourishing soap ~ feel free to use it. PS: You'd better not use the soap for washing your face during the day. It has sensitive lemon essential oil. Grape seed oil contains 20%, which is easy to be oxidized and used early. What if you don't export ps plastic?
Tax export or bonded export?
Arrange export ships and cars to be transported to the customs in advance. You need to find a shipping company and a transportation company for this. )
Tax export: provide packing list, invoice and purchase and sale contract, then declare to the customs, pay taxes and then export.
Bonded is more troublesome, you need an application manual, then export it, and then you need a verification manual.
How to make artificial soap?
The steps are as follows: 1. Cut soap base. Take out the soap base, visually measure the amount of soap to be made, and cut it with a knife at a suitable place. Then the cut soap base is cut into small pieces with any shape, such as cutting into pieces, strips, shredding, etc. The purpose of cutting small is to accelerate melting, so the smaller the cutting, the faster the melting speed. No matter how you cut it, it is recommended that each piece be the same size, so that some soap base will not overheat and the other part will not melt when heated. 2. Heat to melt the soap base. Transparent soap base around 45. Above c, it will begin to melt. Generally, it is melted by waterproof heating or microwave heating. The purpose of waterproof heating is to prevent soap-based burning. If you want to heat directly, be sure to turn down the fire, so as to avoid burns at any time! When heating from water, only a small fire is needed, and the water temperature does not need to be too high. If you see water bubbling or even boiling, it means that the water temperature is too high. Turn down the fire or turn it off temporarily. Try not to stir the soap solution when heating, otherwise many unnecessary bubbles will be generated. If you use color blocks or titanium dioxide (titanium dioxide), you should heat it at the same time as the soap base. As for how much to add, it depends on personal preference and experience (generally speaking, just a little). Soap base melts! This time I melted both transparent soap base and white soap base. The bubbles produced when transparent soap base melts are related to soap base manufacturers, whether the heating time is too long and whether it is stirred when heating. Bubbles do not affect the quality of finished products, but only affect the appearance or spend more time decorating. The water in the washbasin turned white because a soap base fell into the water. After the soap base melts in water, the water turns white. If the soap base in the water is picked up and put back in a small steel cup, the soap base in the whole steel cup will be mixed with water, which will reduce the transparency, so don't pick up the soap base in the water. 3. Add additives. When making functional soap, it is often necessary to add additives, which can be added to the soap solution at this time. Because the soap made this time is the basic practice, this step is omitted and will be explained later when writing functional soap. 4. Color matching. I use colored liquid to mix colors. The concentration of color solution is very high, and it is enough to add one drop at a time. Stir well. If the color is not dark enough, add another drop. Don't squeeze many drops at a time. This will make the color too dark. Once the color is too dark, you can only use a lot of soap base to brighten it. Common color schemes are red, yellow and blue, from which other colors can be derived, such as: red+yellow → orange, yellow+blue → green, blue+red → purple. In addition, light blue is difficult to adjust, because the soap base is slightly yellow, even if only a little blue liquid is added, it still looks a little blue-green. If the transparent soap base you bought is transparent and doesn't feel yellow at all, then your soap base may be made of surfactant, not pure soap. If the color block is used for color matching, the color matching is completed when the soap base melts. If you want to make colorless or white soap, you don't need coloring liquid, and this step can be omitted. 5. Adjust the fragrance. The taste of soap is usually produced by adding essence or essential oil. Essential oils are more expensive, and the taste disappears faster. Some essential oils will taste bad after adding soap, but they are effective. The essence is cheaper and has a lasting taste, but it has no curative effect. If the temperature of soap solution is still high when perfuming, be sure to wait until the temperature drops a little before dropping essential oil or essence, especially for people who use essential oil. Because essential oil volatilizes quickly at high temperature, it is likely to be a waste to drip essential oil at high temperature of soap solution. Some essential oils or essences will slightly change the color of soap liquid after adding it. You can use this step to switch to the previous step, and then adjust the color after adjusting the fragrance. The amount of essence or essential oil added is about 0.5% ~ 2% of the soap solution, and the soap solution in half a small steel cup is about 100CC, so 10 ~ 40 drops of essence or essential oil can be added (1CC is about 20 drops). The amount of essence or essential oil dripped varies according to the type and personal preference. Add more if you like strong ones, and less if you like light ones. Generally speaking, these scents will not remain on your skin after bathing. If you want to make natural and tasteless soap, this step can be omitted. Soap soap with sensitive skin is advised not to add essence, and it is best not to add pigment, because these things will bring certain irritation to the skin. 6. enter the mold. Pour the color solution with adjusted color and taste into the mold until it is about 89% full or the required height. If it is too full, it is not easy to demould. The mould must be cleaned and dried in advance. This mold on the left is left after eating jelly, and this one on the right is a pudding box. After pouring the soap, you can put these soaps aside and let them cool. After about 1 hour, these soaps will solidify, and then they can be packaged or used directly after demoulding. If you want these soaps to solidify quickly, you can put them in the refrigerator or freeze them, and they will solidify in about 15 minutes to half an hour. Using the gap of solidification time, equipment and environment can be cleaned! Small steel cups and stirring rods can be preliminarily washed with warm water in the water pan, which accelerates the melting of soap and soap and makes it easier to wash! Ps. 1 and 2 use pudding boxes, 3 use hibiscus tofu boxes, 4 use jelly molds, 5 use jelly boxes, and 6 use special molds for soap. 7. demoulding. After the soap is completely solidified, it can be demoulded. I cut off the top half of this pudding box and left the flower-shaped part in the bottom half. When demoulding, the first step is to pull the die aside and let air enter between the soap and the die and all the edges. Turn the mold upside down and press the bottom of the mold to let air enter the bottom. When the air completely enters the bottom, the soap will be separated from the mold, and then the soap can be buckled out. 8. modify. If there are many bubbles on the soap, or there are other reasons to decorate it, you can decorate it with the back of a disposable plastic knife or a dry rag or toilet paper. Scrape off the ugly part with a plastic knife, and then wipe it with a dry rag and toilet paper to soften the lines of soap. If the soap is beautiful enough or advocates natural beauty and you don't want to waste any soap, you can omit this step. 9. Packaging and storage. If the modified soap is put in the air, there will be small drops of water on the surface of the soap every other day or every few days, just like sweating. This is because glycerin in soap attracts moisture in the air and condenses on the surface of soap, which does not affect the essence of soap, but will affect the appearance. In order to avoid or reduce the generation of water droplets, soap needs to be wrapped with plastic wrap or PE film and stored in a cool and dry place.