The minimum requirements of UG software for computer configuration are as follows:
1, first of all, it must be an independent graphics card, and it is recommended to use a graphics card above 256MB.
2.cpu frequency is above 2.5GHz.
3. The minimum memory is 5 12MB, and it is recommended to use more than 1GB.
4. The minimum hard disk space is 4GB, and it is recommended to use a hard disk with 8MB cache.
What kind of computer configuration is needed to learn ug? How many processors are needed? What are the requirements for graphics cards?
1. must be a discrete graphics card first. It is recommended to use a graphics card above 5 12MB.
2.cpu frequency is above 2.5GHz.
3. The minimum memory is 1GB, and it is recommended to use more than 2GB.
4, because the current computer hard disk is almost several hundred GB, which can meet the needs of UG. Of course, the higher the configuration, the better the application effect of the software will be. The remaining hard disk space of the partition where UG is installed needs at least 5GB. Because UG software is a relatively large mechanical design software, and in order to make the interface of UG software have excellent display effect, there are still certain requirements for computer configuration. Because the software is constantly updated, it is now described by the configuration requirements of UG 10.0 version. Pay attention to 1 and the graphics card expansion data in three places. A graphics card with more than 9600GT 1024M memory can run perfectly. 2, of course, the memory should be larger, and the configuration should be more than 2G, but now the mainstream configuration is 8G. 3. Finally, of course, the processor. It will be much better to use AMD's in-process computing picture, so it is recommended to use AMD's CPU.
Does UG have a high configuration for computers? Recommend a configuration sheet?
UG has certain requirements for computer configuration, but it has not reached a high level. The commonly used UG9.0 requires a 64-bit system, a 4-core CPU, at least 4G memory, a 500G hard disk, and a 5 12M discrete graphics card. These requirements can be met by mainstream computers.
Ug5 axis computer configuration?
Parameters of ug5-axis computer: ug5-axis computer is equipped with Intel 12 generation mobile core processor i7- 12700H, 14 core 20 threads, with a fundamental frequency of 2.3GHz and the highest core frequency of 4.7GHz；; Equipped with Max-Q RTX30606G graphics card; The screen is equipped with 15.6 inch 2.5K ultra-clear resolution, 100%DCI-P3 wide color gamut screen, and the refresh rate is 165Hz.
Ug5-axis computer comes standard with 5 12GB large-capacity solid-state hard disk, and there is 2.5-inch 7.0mm hard disk space inside the fuselage, which is convenient for expansion. The memory is16 gbddr43200mhz; Equipped with full-size backlit keyboard; Built-in 53.35Wh4 lithium battery;
How does ug2206 suggest to configure the computer?
The recommended WIN systems are: Windows 10, Windows 1 1, WindowsServer20 19 and WindowsServer2022.
LINUX systems include: RedHatLinux7.6 and SuSELinux 15.