Material preparation: foam board, pin, rope, beads, scissors.

Operating steps:

1. Place the rope as shown in the figure, and then fix the rope with a pin.

2. Put the right rope on the left middle rope, put the left rope on the lower rope, pass through the upper rope, pass through the right hole from bottom to top, and then tighten the ropes on both sides.

3. Repeat the previous step in the opposite direction. First put the left rope on the right central rope, and then put the right rope on the lower rope. Finally, put the rope above the cross through the hole on the left from bottom to top. Tighten the ropes on both sides so that you can tie a flat knot.

Weave a flat knot at one end, then put on a bead, and finally hook the rope on the left and right sides into a flat knot with a crochet.

In order to make the bracelet elastic, we also need to fold the ropes at both ends, and then add a rope in the middle to weave a new flat knot.

6. Thread both ends of the rope into the beads, and then tie a knot at the end of the rope. As shown in the picture, a beautiful beaded bracelet is made.