2. Take out the film pasting device first, and you can see a model of a mobile phone power socket on both sides of the film pasting device. We plug the film applicator into the power socket of the mobile phone, so that the film applicator is fixed on the mobile phone.
3. Take out the wet wipes from the suit and carefully wipe off the dust on the screen.
4. Wipe off the moisture left by the wet wipes with a cloth, and don't leave a drop of water.
5. Carefully stick off the fine dust on the screen with the dust removal sticker.
6. Fasten the two holes under the hydraulic film on the two cylinders of the film pasting device, and the film should be as flush as possible with the screen.
7. Then buckle the cover on the film pasting device, so that the hydraulic film can be tightly fixed on the film pasting device, so that it will not be crooked when pasting later.
8. After the tail is fixed, we gently uncover the sticker on the handset position, press the handset position tightly with our hands, and let the water fixing film stick to the screen, so that the top position of the mobile phone is fixed.
9. After the head position of the mobile phone is fixed, the film pasting device at the tail can be removed.
10, then gently uncover the film at the bottom, gently push the hydraulic film with the scraper sent in the membership card or suit, and let the hydraulic film slowly stick to the screen of the mobile phone.
1 1. When scraping with a scraper, be careful not to touch the screen of the mobile phone to prevent dust from sticking to the cleaned screen. If there are small bubbles after pasting, you can drive them out slowly with a scraper.
12. Finally, check whether there are bubbles. After checking that there is no problem with the paste, remove the top protective layer of the hydraulic film.
13. Finally, press the edge of the water stop film more tightly with a cloth to prevent the water stop film from warping after a period of time.