Current location - Health Preservation Learning Network - Slimming men and women - How to write a composition when making lanterns
How to write a composition when making lanterns
1. How do you make your own lanterns?

It's the annual Lantern Festival again, and there must be lanterns! Well, my mother and I are busy making an original lantern.

We got up early, set out for Bridge 2 and bought a handle. When we got home, we took transparent glue, double-sided tape, scissors, a handle we bought, two different Lantern Festival lanterns, a beard with a jade ring, an empty plastic bottle, some decorations on last year's lanterns and a homemade paper-cut dragon and started making them.

First, remove the upper plate and the lower plate from a lantern and stick them on the top and bottom of the plastic bottle respectively. A beard with a jade ring is hung inside the bottom. Punch a hole in the bottle cap and attach a handle with a light bulb, but then the light bulb will only shine under the bottle cap. Let's tie a knot between the two bulbs and the handle to fix it, so that the whole bottle will be illuminated. Then stick the paper-cut dragon you cut on the bottle, huh? It's still empty. What should I do? I ran to ask my mother. My mother thought about it and took out a bow with the word "spring" from the decorations of the last Year of the Ox. I saw the decorations in the Year of the Ox and had a brainwave. I asked my mother to help me get a pair of beards with rings to wear on both sides of the bow, which looks much better. Then cut out a pair of boys and girls from last year's lantern paper and stick them on the opposite side. Finally, a pair of butterflies removed from the ornaments of the Year of the Ox were glued to the empty places on both sides. Haha, an original portable lamp is ready!

Oh, I'm exhausted. It took nearly an hour and a half, but the results and gains were still quite great. No pains, no gains? Looking at the lanterns I made, I feel really happy at work!

2. Make a lantern combination. Make lanterns

Go to a friend's house to play. When she saw me, she said to me, "Today, shall we make a lantern together?" I said, "It's good, but I can't make lanterns." He said, "I can do it, I can do it, and you can do it. You just need to do me a favor." I said, "It doesn't matter. I learned how to make lanterns when you were making them, and then I went home and made a lantern myself. " "Good, then watch carefully when I do it, and ask me if you have any questions."

Then, he found a jar, a nail, a hammer, a bottle cap, a thread and a candle at home. I just stood by, watching what she was looking for, and silently remembering all this. Then she said to me, "Now we can start making lanterns." Then, he added, "Now, let's nail some pictures on the jar to make the lanterns more beautiful. Of course, you don't have to do it like me. You can also beautify it with other things. " I said, "Wait a minute, I'll go home and get these things and follow you." In case I forget when I come back. ""ok, you go and come back soon. " I promised and immediately ran home to get something as prepared as him.

When I came to his house, I saw him nail a picture of a man on Wangzai's milk on the can. I nailed a leaf, a tree and a word. After nailing, she taught me to do the next work. Then, she said, "Nail two holes on both sides, thread the thread through and tie a knot. Then, scrape the oil from the candle into the bottle cap. At the same time, put the wick of the candle in the bottle cap to make a small candle. Then light this little candle and put it in the jar. In this way, as long as you carry this lantern made by yourself, people will cast envious eyes on you. " I did what he said step by step. A lantern will be finished soon.

At this moment, I saw that the lanterns were really beautiful. The hole nailed to the jar gives off light, which makes the painting very beautiful. I proudly carried my lantern home.

I can make lanterns and write compositions. You must have seen red and round lanterns in the second grade, right? However, this red lantern must be made by everyone, right? This is my first time to make lanterns. Careful, careful, patient.

I prepared red paper, scissors, glue and bamboo strips first. When making lanterns, I cut the red paper with scissors first, and then stick the bamboo strips together with glue, so that the two ends are firm, the bamboo strips are round, and the bamboo strips must be the same size. Then, after the glue dries, stick the red paper on the round bamboo strips. Finally, make a small hook at one end of the circle with iron wire and make a hook to hang red paper. Cut out rectangular red paper with scissors at the other end, and then cut the red paper at the other end into filaments. Wow! A red lantern is finally ready, and red adds joy to our lives.

Do you think my lantern looks good at home? Let's do it my way! How beautiful these red lanterns are!

4. How to write "Well, well done!" In my little lantern composition. "I think the bottom should be flat!" My parents and I talked noisily at the dinner table. What's going on here? Then let's take a look at the lanterns I made!

My lantern has a festive atmosphere. The whole lantern shell is made of red paper with some decorative patterns on it. Everyone in my family thinks this lantern is well made, because I have processed it several times. Well, we have to start with making lanterns!

On this day, my mother prepared some materials for me: wooden board, double-sided tape, ribbon, steel wire, red paper, candles and sticks. I started doing it. First of all, I tied three rings with steel wire, with different sizes. Then I strung the three rings together with four steel wires of the same length, then tied a board to the traveler at the bottom, and finally nailed a candle to the board. The basket structure of lanterns is set up!

I took out the red paper again and stuck it on the newly made lantern rack. However, sticking it around just makes it uneven, and there will always be wrinkles. I have no choice but to make do with it.

The lanterns are ready. It's time to hang decorations. I took two long and thin ribbons, one yellow and the other green. Glue them to the top and bottom of the lantern respectively. Lantern looks beautiful, just like wearing it on a skirt!

But how to carry lanterns? It's time to add sticks I tied one end of the wire to a stick and then tied the other end of the wire to a lantern. In this way, the lantern is finished!

I'm glad to see the finished lantern! But if you look left and right again, you will feel a little monotonous. So I posted a few more pieces of love on it, which was quite satisfactory!

Now look at this lantern, it is really interesting: a big round "belly", fancy decorations and a long thin stick dragging on her head, just like a fat woman wearing colorful clothes!

5. Write a lantern composition in 400 to 600 words. This winter vacation, I took on a task: learning to make lanterns through parent-child games. And finish it before the Lantern Festival.

I thought lanterns were just for exhibition in the classroom, so I put an ordinary light bulb in a plastic bottle and opened it to calculate that I could pay the bill. Unexpectedly, the school sent a notice that the finished lanterns would be exhibited in Panlong Park.

I was dumbfounded at first sight, and my mother was the most anxious (always doing things seriously, her motto in life is to be a down-to-earth person, do things seriously and hate being so-so). What should I do? My impatient mother had to lead me to a bamboo shop and learn to make lanterns.

The old man in Zhudian told us that to make a five-pointed star lantern, you must put a five-pointed star first. I saw the old man interweave several bamboo sticks and put a five-pointed star. When we remembered, we untied the bamboo stick and made holes at both ends. I started making lanterns. I posed as a five-pointed star first, and my mother tied up the connected holes with wire. When the five-pointed star is tied, it will become twisted by twisting the wire. The old man quickly took the five-pointed star, adjusted his position and measured the data. Let's recreate a five-pointed star based on this data.

The two five-pointed stars have been successfully played, leaving only the connection. We thought it would be easy to connect, but we were wrong. Don't screw the wire too tightly when connecting, or the five corners will bend and deform, and all previous efforts will be in vain. So, I held the mothers of two five-pointed stars to connect them, and the framework of the lantern was finally finished. We covered it with a layer of red cloth, pressed the colored lights to turn on the electricity, and succeeded in "yeah, yeah". I was ecstatic, laughing and clapping, and laughter spread all over the bamboo shop. ...

The next night, I hung my masterpiece on the wire in Panlong Park, where the school was unified. Many red lanterns have become a unique landscape in the park. And the contribution of my mother and me.

Lanterns are very popular when the Lantern Festival comes. If you have leisure time, it is also a good idea to make your own lanterns. You can't make the "big guy" sold on the street, and you can't find materials such as steel wire and steel plate. Then make a simple paper lantern with bamboo strips, rice paper and pen and ink. Handmade paper lanterns are simple in materials and techniques, which can not only design their favorite patterns, but also add a lot of fun to festivals.

The first step is to make the skeleton. The simple shape of a paper lantern is a cube or cylinder. It is best to make a frame with flexible bamboo branches or bamboo skins, and the joints are tied tightly with thin lines. If it is difficult to find, you can also use slender cardboard and bamboo sticks for barbecue. The firmness and elasticity will be lacking, but it is also a good decoration indoors.

Step 2, make the lamp body. Buy some white and red ordinary rice paper or golden rice paper in Four Treasures of the Study, cut it into the length and width of the lantern skeleton, and you can design your own patterns. Calligraphy, painting and paper-cutting can all be displayed on small lanterns. After pasting, you can also use narrow silk-like paper to wrap the edges up and down, which looks more elegant, much like ancient palace lanterns. If you are not good at painting and calligraphy, there is a simple method for reference. Use a thin paper to trace the desired words on the copybook, then overlap this thin paper with crimson rice paper and dig out the words with a single-edged blade. Remove the paper towel, and hollow handwriting will appear on the red rice paper. White rice paper is used as the lamp body, and red rice paper is pasted inside, which reflects candlelight or light from the hollowed-out place, and the effect is quite beautiful.

The third step is to be a light source. If you put it indoors, you just need to light an ordinary candle in the lantern; If you want to realize it, you'd better make a simple circuit with light bulbs and batteries. It may look a little rough, but lighting a lantern made by yourself on the Lantern Festival will definitely have a different taste!

6. Write a 500-word lantern diary. Today, my mother and I made lanterns together. At first, my mother and I had no idea at all, and we didn't know where to start. We both think it's too difficult to do, and we both feel a little disheartened. Suddenly, Tong Tong said to check online, what should I do. Then my mother went online to check, and my mother and I wanted to find a simpler, faster and better one. Looking and looking, I finally found a lantern made of paper cups, alas! This is simple. Let's make lanterns out of paper cups.

Next, Tong Tong went to get two paper cups, double-sided tape, scissors, red colored paper, wool, chopsticks and gouache paint, and began to make them. In the first step, we take two paper cups, cut them into strips and squeeze them into the belly of lanterns. It's simple. Make a hole in the bottom of the paper cup, then thread it with wool, tie a knot at the bottom and fix it with chopsticks at the top, and the lantern will basically take shape. Paint the paper cup red with gouache, cut it into strips with red paper, and tie it at the tail of wool to make the red ears of lanterns. Finally, of course, the pole for picking lanterns and chopsticks are the most suitable. It will be more beautiful to roll up chopsticks with a piece of colored paper. How's it going? Is it exquisite? When it was finished, my mother and I laughed our heads off. Great, well done ... Of course, my mother has an indelible contribution, so I can finish this work with her help. Thank you very much, mom!

7. How to make writing materials for lanterns: bamboo strips, cotton thread, paste (glue), iron wire, gauze, candles, paper towels, bamboo planers, scissors, etc.

Production steps:

1. Put the bamboo in the steam room and heat it for half an hour, then take it out and dry it in the shade, but don't over-dry it or irradiate it with strong light.

2. Use a bamboo plane to shave the rough epidermis on the bamboo surface.

3. Cutting bamboo strips with required length; It depends on the size of the lantern.

4. Weaving method: complete the lamp holder in a cross way.

5. In the middle of the lamp holder, tie several bamboo rings on the lamp wall.

6. Stick (install) lanterns, first stick cotton gauze, and then stick two layers of glossy paper for lanterns (if there is no glossy paper, fine cotton paper can also be used). Sticking cotton gauze, first brush the diluted gauze evenly on the surface of the skeleton, then gently stick the cut gauze on the lamp holder, and then brush it flat with a brush dipped in paste. It should be noted here that the brush for brushing the paste must be a clean brush, otherwise the lamp surface will be messy. At the same time, the pasted paper must be pasted without seams in order to be truly pasted.

7. Put the lanterns in a cool and ventilated place to dry.

8. draw pictures. Painting adopts the required patterns according to personal taste, such as figures, eight immortals, flowers and birds, ladies and so on.

9. After painting, decide whether to write according to the actual situation. When the characters and patterns are completely dried, brush a layer of tung oil and then dry in the shade, and the lantern is finished.

8. How can we make lanterns better? 150 It snowed today, which reminds me of the Spring Festival and the need to hang lanterns during the Spring Festival, so I want to make a lantern and keep my word.

I first use two No.8 iron wires to form two circles with a diameter of about 20 cm, then take out six No.8 iron wires with a diameter of 20 cm, bend both ends of the iron wires, hook them into two circles, and fix them with thin iron wires, so that the skeleton of a cylinder is completed. Then tie four 20 cm thick iron wires to the upper and lower ends of the skeleton with thin iron wires, and nail a nail (for inserting candles) in the middle of a 5 cm square wooden board, which is tied below. After that, I bent one end of a 10 cm-long iron wire into a hook shape, hooked it on the intersection above, fixed it with thin iron wire, and bent the other end into a hook shape (easy to carry or hang), then found some iron wires, wrapped them around the peripheral iron wires (so as to paste red paper), bought some red paper, stuck them on the iron wires, tied spikes on the bottom, and finally inserted candles.

At night, under the snow, friends stared at the little lanterns with envious eyes. Under its irradiation, the snow shone silver. I see: as long as you pay, you will get a return.

On Friday night, I went to play with Happy. I took two candles and wanted to make lanterns with him. When I got there, I took two used paper cups to make.

We light the candle first, then immediately put the candle on the top of the cup to let it drip, then insert the candle in it, blow out the fire after inserting it, and then tie two rows of holes in the mouth of the cup with a needle. The first disturbance hole is used for threading, and the second disturbance is to let soft light come out of the hole. Put a few more threads into the holes in the first row to tie a knot, but the knot should not be smaller than the holes, and then find a branch to tie the threads. So the lantern is finished. I happily carried the lantern to the opaque path and lit up the road under my feet with our little lantern.

10. Write 200 words about making lanterns. On Saturday, my mother and I made lanterns at home.

We have prepared these materials: art knife, rectangular cardboard (torn by my mother from an old desk calendar), colored soft paper, red ribbon, thread, ruler, disposable chopsticks and double-sided tape.

First, my mother folded the upper and lower sides of rectangular cardboard into 1cm wide sides to make the upper and lower sides of lanterns, and then drew flat lines in the middle of the paper with a ruler and a utility knife. Each line is about 1cm apart, so it is a waste of energy and a bit dangerous to penetrate the cardboard. Finally, the cardboard was cut, and my mother bent the whole cardboard a little, only to see the lines on the cardboard open like small fences. It's amazing! Then, my mother rolled up the cardboard, and I glued the left and right sides of the cardboard. Cn together with double-sided adhesive tape. My mother gently rolled the cardboard into a cylinder. Wow, the upper part of a bulging lantern is ready. Next, we will make tassels under the lanterns. Mother picked up the colored soft paper, folded it in half several times and said to me, "Baby, it's your job now!" " "I happily took the paper, cut it into small spikes with scissors, and tied it under the lantern with red silk thread. The round lantern looks much more beautiful than before because it has a "tail". Finally, I stuck a red ribbon on the edge of the lantern with transparent glue and hung it on disposable chopsticks. Ah, a complete and beautiful lantern is officially completed!

Looking at the lanterns made by myself and my mother, my heart is full of joy.

Original address: