Cold protection; Take the initiative to keep warm against the cold and create a warm and comfortable environment for the human body.

Far-infrared physiotherapy function: when the electric vest chip is electrified, it will generate far-infrared rays with the wavelength of 4~ 14μm, which will produce biological vibration absorption effect with human cells, effectively improve human microcirculation, activate cell tissue and promote metabolism, thus achieving the effects of promoting blood circulation, removing blood stasis, diminishing inflammation and relieving pain and improving immunity.

Uses: Suitable for active heating and physical therapy of human body in winter.

Application mode

Put on the electric vest. When heating is needed, connect the plug-in in the vest with the battery, press the battery button, turn on the power supply, adjust it to the temperature range you need, and the electric vest will start heating. In order to achieve the best effect, an electric vest should be put on the outside of cotton sweater or shirt to reduce the heat loss caused by absorbing far infrared rays and improve the utilization rate of far infrared rays. When you need to stop heating, you can turn off the power by pressing the key.

Cleaning method

Dry clean the vest and remove the lining during dry cleaning; The lining is washable. Battery control operation

The special smart battery is a 7.4V rechargeable lithium polymer, which can control the heating temperature in three stages. The specific operation is as follows:

Turn on the electric vest chip, press the button for about 3 seconds, the indicator light is green, that is, turn on the power. At this time, it is the highest temperature full power output; Press it again and the indicator light will turn orange. This is the second power output, followed by temperature; Press it again, the indicator light turns red and the temperature is the lowest; Press it again to turn off the power. Users can control the temperature by pressing the keys in turn according to their own needs.

Battery charging operation

Connect the battery with a special charger, and then plug the charger into a civil 220V power socket to start charging.

At the initial stage of charging, the charger indicator light shows red, and it is normal to blink occasionally. The battery is fully charged, and the charger indicator light shows green.

The total charging time is about 3.5~4 hours.