Save the original file as a cad2000/LT2000DXF file, and then save it as a version file after opening it.

File-Save As-Select "AutoCAD 2000/LT 2000 DXF (*. DXF) "As file type-Save.

Open this DXF file and save it as "AutoCAD 2004 Graphics (*). Dwg) is formatted again, so that the print stamp is gone.

You can also save the graphics file as R 12 DXF file, which should be eliminated. In addition, the printing stamp can be eliminated by changing the acptamp.ar x file under the cad root directory to another name or deleting it.

It is best to save it as an earlier version. Dxf format, then close the original file and open it. Dxf file and save it as. DWG, you can go.

Save the original file as ". Dxf file, then close the original file and open it. Dxf "file and save it as". Dwg file to replace the original file, ok!

First, open an "educational version" file with a non-educational version of CAD, and then go to File → Drawing Utility → Repair First, repair this file.

Save the repaired file as a. dxf file.

After opening it. Dxf file, saved as. dwg file.

The most effective and quick way is to download a software called "dwg graphics to remove educational imprint". EXE”。

How to eliminate the stamp of educational edition detected by CAD? You can save the drawing as. DXF format, and then open it. DXF drawing and saving as. DWG format to eliminate the stamp mark of the education version!

When opening CAD, prompt the education version. How to get rid of it? In most cases, you can directly open the education file and save it as *. Dxf file, then close CAD, then open CAD to open this DXF file, and then save it as *. Dwg file.

Occasionally, it will be more troublesome if the marks in the education edition cannot be removed normally by this method. You have to install a lower version of CAD, and then convert the file into R 14 version, and then it will be OK. Just try it.

How to remove the logo of CAD education version and find the installation package on the computer to reinstall it? When installing, don't choose the educational version, just choose the professional version.

How to prompt when copying CAD; This application has detected that a mixed version of the license object is involved in this operation. This mixed version of the license object is a small plug-in with CAD secondary development function written by other experts. It may be a special function or a bad virus. There was a virus that "the party and the country will not forget you".

What does it mean that cad has detected the education version? Generally, when you open a drawing, there will be such a prompt. This means that the drawing you open is an educational version of CAD. Click Continue to open the drawing.

Many pirated CAD software are based on the educational version, because the authentication of the educational version is not peer-to-peer, so it is easier to crack.

When printing drawings, the words "Autodisk cad 200N Education Edition Generated" will appear on all sides of the drawings. There is no way to remove it at present.

How to get rid of the prompt of "educational printing seal detected" when opening Auto CAD file? Save the file in dxf format and save it in dwg format with cad, and there will be no such mark.

Open the CAD drawing prompt: educational printing seal detected. If you continue, the graphic will be printed as an AUTDESK educational product? The wrong version is installed. Since 2006, there were three versions when it was cracked, including the educational version.

Business edition, I forgot one. Hehe, that's what happens when you choose education. Later, I changed it to the permanent business version. However, the education version can also be left unmarked, and it can also be changed in the print settings.

You can also find the file acplstamp.ar x in the root directory of AutoCAD, change its name or delete it, so there is no function of printing seals.

This is because the opened drawings are not of the same version. If they are true, they cannot be opened with the existing software. You can reinstall CAD2004, 2007, 20 10, etc.

It may not be in model space, or different fonts may be ignored.

It is also possible to display that the zoom is not in the middle position. You can click the view, southwest isometric view, top view or other views to let the window recalculate the position.

You can click Open directly to continue. Do not click Ignore or do not show the Ignore dialog box in the future. The quickest and best way is to click X to close the dialog box (whether to open the display graph, select Yes, and open it). I haven't met a CAD drawing of CAD20 10 that can't be opened by this method.

The CAD version of 20 1 1 is displayed after opening. How to get rid of the education edition? If you can delete it, first open the drawing-save as-select DXF format as the file type-then open the saved DXF format file-and finally save it as DWG file. Education will be deleted.

If it is CAD itself, it may be the wrong version. Or the installation is wrong.