1. Pretreatment: Apply a dead skin softener to the edge of the finger to soften the dead skin, gently push the dead skin upward, and slowly cut off the dead skin with dead skin scissors. Pay attention to the consistency of action, and it is best to cut off a dead skin, otherwise there will be small burrs.

2, engraving and grinding nails: This kind of nail is polished with a sponge, starting from the little finger to the thumb, from the left side of the nail to the middle, and then to the right side, every place should be engraved and ground in place. Then clean the nail surface with a dust brush, and then clean the nail surface with clean water.

3. Dry the nail surface to keep it longer. Priming: Primer must be Bo Tu and turn on the light for 60 seconds. Apply phototherapy glue or reinforcing glue: be sure to apply a little thicker to strengthen nails, so that no matter whether the nail surface is sunken or the nail is thin and soft, it can be improved. After lighting for 60 seconds, wipe off the floating glue, smooth the uneven nail surface with a rubbing strip, and clean the nail surface with clean water.

4. Apply nail polish glue: choose your favorite color and apply it to the nail surface. Brush Bo Tu lightly and apply it two or three times. If you want to make style stickers, you can paste, decorate or hand-draw patterns according to your personal preferences. If diamonds don't need to be completely wrapped, the periphery of diamonds should be wrapped with a hard seal of sticky diamond glue, and other pearl ornaments or shell ornaments should be completely wrapped with sticky diamond glue or hard seal to prevent them from falling off more firmly.

5, coated seal: if it is only monochrome or hand-painted, directly coated with tempered or crystal-plated seal, if the jewelry is coated with a hard seal, there is no need to coat the seal. Finally, finger painting is completed.