Step 1: Paste the silica gel patch.

I bought a weight-loss silicone sticker with 3 pieces, of which 1 piece is square and 2 pieces are oval. Each silicone patch has a black surface and a yellow checkered surface. The square silicone patch is attached to the white square in the middle of the belt. Please remove the transparent plastic film on the black layer before pasting. Two ellipses are also removed and attached to the positions on both sides of the belt.

Note: Don't throw away the torn transparent plastic film here. After using the all-around sports belt, please stick 3 pieces of transparent plastic protective film back to the silicone patch according to the shape to avoid sticking and storing.

Step 2: Fasten your belt.

Aim the square silicone patch at the navel, put the oval silicone patch on both sides, and put the belt close to the waist skin (don't use it through clothes). Then tighten the belt and stick the devil on the ends of both sides of the belt; If your waistline is wider than your waist, you can use the attached belt extension to extend your belt.

Note: Of course, this is the general position with thin waist and abdomen. If you want to lose weight in other parts, such as back, thighs, buttocks, calves and so on. , you can tie the belt in the corresponding position accordingly. Only the same square silicone patch faces the front, and the oval silicone patch is placed on both sides.

Step 3: Install the battery or plug it in.

If your weight-loss belt contains batteries, open the battery cover and put the positive and negative poles indicated by two No.7 batteries installed in the controller in the battery box.

And if you plug in the power plug before the power is turned on, you can plug in the socket.

Step 4: Automatic or manual operation of the controller.

Press the power button on the handheld controller to start the machine. There are several speeds to choose from in manual mode, and the self-acceptance intensity is appropriate. However, it is recommended to start with a low-speed massage and then gradually increase the speed. Low-speed massage can promote blood circulation, while high-speed massage is specially used to stimulate larger muscle tissue. In automatic mode, the speed will be adjusted automatically.

Note: the general automatic mode of the weight-loss belt is set to 15 minutes every time it is turned on, and it will automatically turn off when the time comes, without adjustment; If you need to use it again, you can press the power switch to restart it. And for first-time users, you can use 15 minutes at most every day. In addition, during use, manual and automatic modes cannot be interchanged. Press the power button to turn off the product completely, and all instructions will go out.

Step 5: Stop working.

If manual mode is selected, you can press the power switch again if you want to stop Anmo. If you choose the automatic mode, you can also stop yourself halfway and press the power switch.

Proper use of weight loss belt: 7 points to pay attention to.

1, be careful when plugging in, and don't get wet when using.

Be extra careful when using plug-in weight loss belt, otherwise it is easy to have an accident. Generally, before use, be sure to check whether the slimming belt is in good condition, and then insert the power plug into the mains socket. If it is damaged, it cannot be used. Also, the handheld controller can't be immersed in water, otherwise it can't be used, and the power plug must be unplugged after each use.

2. Within one or two minutes after use, there may be different degrees of discomfort (such as itching, numbness, sweating), which is a normal reaction, so don't worry.

3. Patients with epilepsy or heart disease are prohibited.

4. Do not use this product on the neck, lips, head or chest.

5. Do not use this product on infected or irritated skin.

6. Do not use it during menstruation or pregnancy.

7. It shouldn't take too long to use this product every day. It is recommended to use 15 minutes every day.