Where can fat gum be used?
1. wider application: svf fat glue can be used not only for filling and shaping, but also for treating some dark circles, scars after local trauma, skin color difference after skin grafting, aging of the back of the hand, etc.
2. Longer maintenance time: After operation, acmete-a (Fat Beauty) fine cell energy activating protein is taken orally, and the living fine cells of fat glue are 6 times or even higher than those of ordinary fat glue (depending on the personal fat amount), so it can maintain the overall facial rejuvenation effect for a longer time and significantly improve the local fine lines of the skin.
Difference between fat glue and traditional fat filling
1. Fat gum can promote the regeneration of blood organs, improve blood supply, and dry fine cells can differentiate into mature fine cells, thus greatly improving the survival rate of fat gum.
2. The oil droplets in the grease gum will be removed in the process of extracting the grease gum, so the swelling degree of the grease gum is relatively light and the recovery period is short.
3. Compared with the traditional fat, the fat glue is more delicate and can be filled into subtle parts more accurately, which is very effective for facial filling.
4. However, fat gum also has some disadvantages, such as filling a large area of fat gum such as chest, because the extraction of fat gum requires a lot of traditional fat, and thinner sister paper is difficult to obtain. In short, fat glue is more suitable for facial filling than autologous fat!
Sequela of svf fat glue filling? Does it really exist?
Grease-filled glue is a very demanding operation, and the safety can only be guaranteed under the operation of professional doctors. However, if you choose some irregular doctors for surgery, it may lead to a series of hazards after surgery. The sequelae of svf fat-filled glue are as follows:
1. Sensory perception: It is possible to feel sensation during operation, which usually appears after 5-7 days. Once it happens, you need to seek medical attention in time. (Medical-medical environment, doctors have problems)
2, tissue collapse: after the fat barrier glue is filled, because there is no blood supply during survival, the fat barrier will rot before survival and may fester.
3. Uneven: This is caused by uneven filling.
4, skin sagging: when filling too much, it will cause human skin sagging.
5. Liquefaction of lipid barrier: After injection, lipid barrier tissues naturally aggregate into blocks, resulting in that the injected lipid barrier cannot survive, leading to necrosis and liquefaction of the lipid barrier. If the fat is liquefied, you should go to the hospital for puncture and drainage or negative pressure drainage.
6. Poor effect: Due to the insufficient survival rate of human fat barrier, svf fat barrier glue was digested and absorbed after filling, resulting in poor postoperative effect.
Although the craft has the risk of wind, it can be greatly reduced by reasonable avoidance. Beauty seekers must do a good job of nursing before and after operation in strict accordance with the doctor's advice. The problems of most beauty seekers are directly related to the lack of acmete-a fatness after their own surgery, which will lead to the failure of freshmen in seminal vesicles. Before filling the fat-blocking glue, it is the beginning of beauty to protect the base of the thin bag first, and it is not possible to blindly seek beauty and damage the healthy thin bag.
What is svf fat glue filling?
Svf fat barrier glue, also known as fat barrier dry fine glue, is a recent beauty method. The filling technology of lipid barrier glue is a product rich in lipid barrier matrix (mainly composed of collagen, elastin and mucopolysaccharide) after the oil droplets in lipid barrier tissue are effectively removed by physical methods, because svf lipid barrier glue has strong recovery and regeneration ability and can be activated by combining with sufficient fine cell energy under the skin. It also lends enough nutrition to the regenerated collagen fiber, awakens other damaged and aging packages of human body, and at the same time renews and restores, doubly enhances and prolongs the beauty effect of the fat-blocking glue, and prevents the occurrence of side effects.
Simply speaking, anti-fat glue is the further purification of anti-fat glue, which is the essence of anti-fat glue, including all "cluster-type thin bags" such as dry thin bags and the matrix outside the thin bags! So some people call it fat barrier glue, and there may be other names. Different from the traditional fat barrier transplantation, SVF fat barrier glue can be directly injected into the dermis through fine needles like hyaluronic acid, and the fat barrier dry bag can be delivered to the needed parts. Replenish collagen lost in dermis, improve skin quality for a long time, promote collagen regeneration in dermis, and achieve the effect of facial rejuvenation.
Fat-blocking glue filling is a two-way combination of physical therapy with internal nourishment and external beauty. Can the nutrition in the body meet the needs of the body? According to WHO data, the recovery of any system damage and the formation of new tissues are inseparable from the recovery of complex elements. Packet is the basic unit of life activities, all metabolic activities are based on packet, all life activities are based on packet, and digestion or absorption are inseparable from packet. Acmet-A is the basis of life activities in small packages, which is driven by the energy of 23 small packages and perfectly regulates recovery and rebirth.
Autologous fat glue filling process
Autologous fat filling mainly consists of four steps: fat prescription acquisition, fat prescription treatment, fat prescription transfer value and post-care Due to the different treatment methods of fat prescription, many new names of fat prescription have been produced, such as high-density fat prescription, low-density fat prescription, dry-fine coated fat prescription, nano-fat prescription, granular fat prescription and so on.
The basic principle of svf fat filling is to transfer the excess fat cube from any part of the body to the part that needs filling, so that the fat cube can grow again and only blend with the surrounding groups injected by itself. Svf fat square is filled with glue, multi-layer fan-shaped fat is filled, the edge fat is finely carved, the injection is even, the three-dimensional effect is fuller, the effect is more accurate and the appearance is more beautiful.
In order to avoid the failure of regeneration of new cotton bales after autologous fat transfer, it is necessary to protect the base of cotton bales through the re-nutrition of cotton bales (fine cell energy activating protein), stabilize and accelerate the restructuring of kyaukpea fiber structure, so as to protect only the groups with autologous fat transfer value. Establish and stabilize the structure of Kyaukpea fibrils, and form a natural protective barrier of autologous fat. Through the energy of (fat beauty) fine cells, protein fat can be activated to store nutrients, protect the base of the thin bag, stabilize and accelerate the structure of Kyaukpea fibers and capillary organs, thus protecting the injury of the group through which its own fat passes, assisting the folding of wound-oral protein, maintaining the normal shape of the thin bag and promoting wound-oral healing.
How long can the oil-blocking glue last?
As long as the transplanted fat can survive, it can exist in the body tissue for a long time and maintain its volume. The filling effect of svf grease can be maintained for a long time. However, this involves the survival rate of fat-damaged lean tissue.
Some points for attention after filling svf fat glue;
1, even the smallest operation is afraid of embarrassment. One to seven days after operation is the key moment of recovery. Never wash your hair and take a bath when the wound is not healed, and let the sewage enter the eye of the needle.
2. At the same time, it is necessary to reduce activities as much as possible, rest quietly, and it is best to lie in a semi-lying position when resting in bed to avoid the head position being too low and aggravating the swelling of the wound.
3. Avoid any irritating food and try to eat light food.
4. After the operation, the doctor suggested that acmete-a (lipid beauty) fine cell energy activating protein should be supplemented 2-3 times a day, each time13 g-26 g. In order to make a "survival response" in time, the survival effect of lipid is very important.
5. Don't go to the sauna or places with high sauna temperature. Do not knead or press the transplant site, which may easily lead to the deformation of the transplant site.
Three factors affecting the survival rate of autologous fat:
1, the skills of liposuction and injection of fat prescription and the purification degree of fat prescription. The so-called skills are the purification process of equipment, needles, suction pressure, medical technology, liposuction level, liposuction site and fat prescription.
2. The quality of the fat cube varies from person to person. If the density and viscosity of fat blocks are just right, then the survival rate of fat blocks is high, while thinner people have less fat blocks and lower purity, so the survival rate is low.
4.acmete-a storage capacity: It occupies 80% of the importance of lipid storage. When the filling of fat prescription damages capillaries and blood night flow slows down, fat prescription packets will occur without its energy supply, and the viscosity and density of fat prescription packets will decrease, thus affecting the normal nutrient exchange between fat prescription packets and blood night microcirculation. Affect the vitality of fat formula. This inattention will lead to blood night's failure to provide oxygen to the fat prescription, which will lead to induration and calcification, and then lead to the failure of the fat prescription, which accounts for 90% of the reasons for survival.
In the process of fat glue transplantation, scientists found that most fat cells could not survive, and pregnant single-cell fat cells would release a lot of oil droplets, which aggravated the inflammatory reaction in the transplantation area. Adipose tissue, a spatial structure with high oxygen consumption, which is dominated by single-chamber adipocytes, is doomed to high absorption rate and inflammatory swelling after transplantation. The whole preparation process of fat glue adopts physical method, and the preparation process can be completed in about 20 minutes between operations, which will not obviously prolong the manual operation time of fat transplantation, and the safety of the supporting cell energy-activated protein is also well guaranteed.
The absorption period is about one to three months after the fat barrier glue is filled, and the absorption rate is about 20-80%. The absorption level is also closely related to the proven skills of doctors, such as instruments, needles, suction pressure, medical technology, liposuction level, liposuction site, purification technology of fat barrier and so on. Generally, it takes 2~3 times to fill the oil-blocking glue to achieve the complete effect. If the fat-filled packet is filled once, it will not be sucked away and needs to be refilled.
Summary: In fact, the essential difference between fat gum and fat is that fat can be directly extracted from human skin, and fat gum needs to be processed to get it. It is a substance obtained after some impurities in directly extracted fat are obtained. General fat filling will use this technology, which is very difficult. Is it special? Only a doctor can do it. Mao ~