Step 1: First make a turntable and cut out two circles. The white circle is a slightly hard cardboard used to make the bottom of the turntable. In addition, cut a piece of red paper from Zhang Yuanyuan, two pieces of which are 10cm in diameter, and the red paper is decorated on the turntable.

Step 2: Take white hard paper, fold the red paper in half, and then divide the paper into three equal parts based on the middle of the bottom.

Step 3: Fold in half on the basis of three equal parts, that is, fold the right side along the line, and then turn the left side over. After folding, there is an opening on the right side. We glued the edge between the two layers at the opening and fixed it together. We have to fold six parts in different colors.

Step 4: We stick the folded red part on the white cardboard according to the picture and fix it with glue. Then there are several layers of openings at the edge to put small cards.

Step 5: We stick all six components on white hard paper, and then stick a black paper circle with a width of 3mm on the periphery of the turntable. This black paper ring is made with professional instruments. It may be a little difficult to cut with scissors. It doesn't matter if it is too difficult to cut the black paper ring.

Remember to poke a hole in the middle of the turntable. At this point, the turntable is complete!