1, leveling before paving:
(1) Before tiling, the base should be cleaned up. If there are decorations such as lime putty, latex paint and wallpaper on the wall, or dirt on the ground, it must be cleaned up, otherwise the cement mortar will not be firmly bonded with the base.
(2) In addition, if the wall itself has cracks, it should be properly handled before sticking bricks to avoid cracks in the grass-roots structure in the future leading to cracking or falling off of wall bricks; There is also the cement wall to be brushed, and the ground and wall with too big difference in flatness or verticality should be leveled with cement mortar.
2, laying sequence is exquisite:
Bricks stuck to the ground should be stuck from the inside out. If there is a slope or floor drain on the ground, pay attention to find the slope according to the drainage direction; The wall brick should be laid from bottom to top, and for the sake of beauty, the bottom brick should be attached afterwards. After the wall tiles are pasted, press the floor tiles again. Half a brick, try to put it under. In addition, one wall cannot be glued to the top at a time to prevent the tiles from collapsing due to heavy weight.
3, wall brick to fully soak:
(1) Wall tiles have high moisture content, which must be considered when pasting. Before tiling, the base should be fully watered and wetted, and the tiles should be soaked in water for at least 20 minutes before use.
(2) Otherwise, the moisture in the mortar will be quickly absorbed by the dry grass-roots and ceramic tiles and quickly coagulated, which will affect the bonding fastness. Wall tiles will also absorb water in cement, so that cement can not play the role of adhesive. In addition, the water absorption rate of each brand of wall tiles is different, depending on experience.
Extended data:
Features:
1, wall tile is an effective way to protect the wall from being splashed by water. They are not only used for wall surfaces, but also for edge decoration of doors and windows. This is also an interesting decorative element. Used for decorative wall tiles at the skirting line.
2, that is, the beautiful and protective wall foundation is not easy to be stained by shoes or the feet of tables, chairs and stools. Ceramic tiles for pools and bathrooms should be beautiful, moisture-proof and wear-resistant. The smoothness of wall tiles is very high, and there are many colors and patterns to choose from, which are lighter and thinner than floor tiles.
3. Glaze ensures the waterproof performance of wall tiles and has good anti-pollution ability. Ceramic tile is a wear-resistant, waterproof, beautiful and easy-to-clean material.
4. The requirements for wear resistance are not as strict as those for floor tiles, and there are more kinds to choose from. Ceramic wall tiles have low water absorption, strong corrosion resistance and aging resistance.
5. Especially its special moisture resistance, scrub resistance and weather resistance are irreplaceable by other materials. Its low price and rich colors are ideal decorative materials for kitchen, bathroom and balcony walls in family decoration.
Baidu encyclopedia-wall brick