1. If there are small solid lumps in it, the user is not suitable for using the thermostatic faucet; 2. Tap water contains powdery sediment or soft foreign matter, which may reduce the sensitivity of thermostatic valve core and shorten the service life of thermostatic faucet; 3. Try to shorten the distance between the water heater and the faucet, and let the hot water reach the faucet as soon as possible; 4. The normal water pressure is 0.05 MPa.

~

0.6

Mpa5. The water supply pipe shall not be installed incorrectly. The hot water pipe must be on the left and the cold water pipe must be on the right. 6.

Before installing the thermostatic faucet, the installation site must be cleaned up to avoid the apron, thread and thermostatic valve core of the faucet being damaged by small sand stones; 7. Please install according to the instructions, and pay special attention not to leak, lose or damage any gasket or apron; 8. The thermostatic faucet itself has no heating function. Please adjust the water temperature of the water heater to 60℃

~

85℃; 9. If the water pressure difference between hot water and cold water is too large, please adjust the valve of the bracket with a screwdriver.

Families who use gas water heaters need to pay more attention to this.