2. Cover the left needle tip with the first eye of the right needle.
3. Pick out the first needle from the second needle and put it on the correct needle. Repeat the same action with the left needle.
4. Do this for each inner needle until there is no needle in the left needle and only one needle in the right needle.
5. Cut the thread, leaving 6 inches of thread. Gently pull out the last needle with your fingers to make it bigger. Then pull the thread out of the coil, take out the needle and tighten the thread.
Extended data:
Precautions:
1. The above is a demonstration of the method of finishing with flat needles. You must relax your knitting, or the tail edge will be tight. The strength of the hands should be even, and the stay wires should be consistent.
2. If the needle is opened and closed by threading method, the upper and lower needles alternate before knitting, and the thread can be taken from the back.