The process of knitting anklets with thin threads

Braiding diagram of red rope bracelet, ((attached with production step diagram) teaches you to weave red rope bracelet step by step. %D%A six kinds of red ropes for knitting bracelets. (as shown in the figure) %D%A The required material is No.25 embroidery thread, and 6 embroidery threads with the length of 1 m are prepared. %D%A Bracelet Weaving Step 1: Choose your favorite color. As shown above: Line A is red, Line B is orange, Line C is yellow, Line D is green, Line E is blue and Line F is pink. Arrange six red ropes of different colors according to your favorite color, and glue them with transparent glue so that one end can't move. As shown in the figure below, the second step of %D%A weaving bracelet: put the A line on the B line, and the first step of bracelet weaving begins. % d% as shown in the figure. %D%A Bracelet Weaving Step 3: Tighten the A and B wires. Step 4 of bracelet weaving: A repeatedly winds the B wire 1 turn, and then tightens the second wire. Step 5 of bracelet weaving: Next, the A line wraps around the C line twice. Then tighten the two threads. (The method is the same as Figure 3, Figure 4, Figure 5 and Figure 6. ) Bracelet Weaving Step 6: Use D, E, and F lines to make two loops of A line in turn. (The method is the same as Figure 3, Figure 4, Figure 5 and Figure 6. ) bracelet weaving step 7: Next, the sequence of B lines is C line, D line, E line, F line and A coil twice. (The method is the same as Figure 3, Figure 4, Figure 5 and Figure 6. ) bracelet weaving step 8: the third and fourth flat cables ... and so on. The pictures are arranged into the appropriate length as follows, and the length depends on the size of each wrist. %D%A Delete the extra lines at the end .. You have to ask everywhere: How to knit bracelets? How to weave a bracelet? How to weave the bracelet? Something like that? Dancer can easily help you complete these bracelet weaving diagrams. Start looking for the red rope quickly. If not, try to knit your shoelaces first.

Weaving method of bracelet

Show me the knitting method of my bracelet. Here are some ways to weave bracelets: Heart-shaped bracelet illustration:. Line 8 1 m, tied with diagonal knots.

Letter reform. I will always upload information about Chinese knots in QQ space. .

Chinese knot bracelet weaving-Chinese knot art wants to learn how to weave bracelet ornaments. Learn how to weave a bead bracelet here-a beautiful bird's head knot bracelet and a stunning six-petal flower bracelet. A beautiful oblique knot bracelet weaves a dazzling ponytail bracelet. Two-color snake bracelet weaving method _ bracelet weaving method _ jewelry _ beauty+February 2008 1 1.

Two-color snake knot bracelet, simple and beautiful, more colorful. Let's learn how to weave a two-color snake-knot bracelet. It shower/j/1010/0 bracelet weaving method.

Is there a difference between the knitting method of red rope anklet and bracelet?

Handstrings can be made of thin red rope, such as long knot, unity, oblique knot, double money knot and so on. And the anklet can be relatively simple, flat knot and double connection.

The knitting method of diamond red rope bracelet is not complicated. Just prepare two red ropes and follow the knitting diagram of the red rope bracelet below step by step.

Weaving method steps of red rope bracelet with diamond knot 1, select red rope and corresponding pendant, red rope can be used only when no pendant is needed, and each bracelet uses about 160cm;

The second step is to fold the red rope in half, start weaving patterns, tighten them evenly, and leave a small hole as a buckle;

Weaving method of red rope bracelet with diamond knot Step 3, the second diamond knot starts from the previous one, as shown in the figure, and the second knot is tightened, and the second thread is crossed to prepare to weave the third diamond knot;

Step 4: Weave a red rope bracelet with a diamond knot. Tension complete. When the length of the bracelet is average, put on accessories and continue to knit the diamond knot of the other half.

Step 5: Placement method of red rope: The red rope below is wound upward through the double ring, and then enters the middle square hole, and the other rope tail is wound backward into the same square hole, and then the three-dimensional structure is gently pulled up, adjusted and tightened. Subtract the excess red rope, and the tail is glued.

How to weave anklets?

1. Route selection: Chinese knots are divided into knots, jade ropes and twisted ropes. The picture shows the jade line. Jade line includes 7 1# jade line, 72# jade line, A jade line, B jade line and C jade line. From 7 1# to c, the lines gradually thicken.

2. Take two ropes about one meter long (the length of the long line of sight is slightly different from the length of the bracelet) and start weaving snake knots at the lower end of 10 cm.

You can also weave a diamond knot, which is very similar to the snake knot, but tighter than the snake knot.

3. Weave a snake knot of about 1 cm before threading beads, then weave a snake knot of about 1.5 cm before threading beads. Repeat this process until the required length is reached.

4. After the left thread end and the right thread end are folded, take another thread about 20 cm long and take the folded four threads as the axis to start knitting a flat knot.

5. Burning: After the flat knot is woven, cut off the thread ends on both sides, leaving about 1 to 2mm, and then burn the thread ends with the blue flame of a lighter. When the thread end is burned into a bead shape, the metal part of the lighter is immediately pressed onto the knot.

6. Thread the thread ends on both sides through the beads respectively, then tie a snake knot at the end and burn it in the above way.

7, finished, call it a day!

Novice Handrope Weaving Method: Graphic Weaving Video Tutorial

Boutique Red Rope Bracelet The knitting diagram of the boutique red rope bracelet here will tell you how to weave the boutique red rope bracelet.

The first step of weaving fine red rope bracelet: material preparation 25th embroidery thread, 6 treaty preparation 1 meter long embroidery thread. The first step of the bracelet: choose your favorite color, arrange the red ropes, and glue them with transparent glue so that one end can't move. Fine red rope bracelet weaving Step 2: Place the A line on the B line, and the first step of bracelet weaving begins. Line a turns around line b from top to bottom. Fine red rope bracelet weaving Step 3: Tighten the A and B lines.

The fourth step of the red rope bracelet weaving method: A repeatedly winds the B line 1 turn, and then tightens the second turn. Step 5: Next, the A line is wound around the C line twice, and then the two red bracelets are tightened. Step 6: Line A circulates with Line D, Line E and Line F respectively in the same order. Step 7: Next, Line B circulates with Line C, Line D, Line E, Line F and Line A twice/Step 8: Boutique red bracelet.

Cut off the extra thread at the end. The threads at both ends can be braided with three braids, and soon a beautiful lucky red rope will be made.

How to weave anklets

Red rope bracelet weaving, teach you to weave bracelets with red rope step by step. Weave six kinds of bracelets and red ropes. The required material is No.25 embroidery thread, and 6 embroidery threads are prepared, with the length of 1 m.

Step 1: Choose your favorite color, as shown above: line A is red, line B is orange, line C is yellow, line D is green, line E is blue, and line F is pink. Arrange six red ropes of different colors according to your favorite color, and glue them with transparent glue so that one end can't move. Step 2 of bracelet weaving: put the A line on the B line, and the first step of bracelet weaving begins. Step 2 of bracelet weaving: Line A wraps around Line B from top to bottom, and Step 4 of bracelet weaving: A wraps around Line B repeatedly 1 turn, and then tightens the second thread.

Step 5 of bracelet weaving: Next, the A line is wound around the C line twice, and then the double-line bracelet weaving is tightened. Step 6: Line A and Line D, Line E and Line F are circulated twice in the same order. Step 7 of bracelet weaving: Next, line B weaves the bracelet twice with line C, line D, line E, line F and line A in turn; Step 8: Layout of the third and fourth wires.

Knit to a suitable length, which depends on the size of each wrist. Cut off the extra thread at the end.

The two ends of the rope can be woven into colorful lucky red rope by three weaving methods. The knitting method of the bracelet is so simple, why not try it yourself? .

The compilation of bracelets is a complete collection of transit beads.

Required materials: foam board, pin, rope, transfer beads, scissors.

Step by step method

1. Place the rope as shown in the figure, and then fix the rope with a pin.

2. Put the rope on the right on the middle rope on the left.

3. Put the left rope on the lower rope.

4. Pass the crossed rope through the hole on the right from bottom to top, and then tighten the ropes on both sides.

5. Repeat the previous step in the opposite direction. Put the left rope on the right central rope first, and then put the right rope on the lower rope. Finally, put the rope above the cross through the hole on the left from bottom to top.

6. Tighten the ropes on both sides so that you can tie a flat knot.

7. Weave a flat knot at one end, then put on a bead, and finally hook the rope on the left and right sides into a flat knot with a crochet.

8. In order to make the bracelet elastic, we also need to fold the ropes at both ends together, and then add a rope in the middle to weave a new flat knot.

9. Thread the rope at both ends into the beads, and then tie a knot at the end of the rope. As shown above, a beautiful beaded bracelet is made.