Current location - Health Preservation Learning Network - Healthy weight loss - The whole process of cotton trousers
The whole process of cotton trousers
The whole process of cotton trousers is as follows:

1, select fabric:

The outer material is mainly breathable and beautiful, and the inner material is called lining. Try to choose something skin-friendly, because the clothes you wear don't have to consider beauty.

2, size:

Pants are four feet long, two feet four around the waist and three feet around the hip. The thigh is one foot six and the ankle is eight inches. All the above are net sizes, which can be increased by one or two inches when cutting.

3, processing and cutting:

After knowing the size, you can process it according to the external material. First draw the starting point and ending point on the front piece of cloth with chalk according to the size, then cut the front piece, and then cut the back piece on the basis of the front piece according to the size. The difference is that you need to add 0.5 inch to the crotch.

4, cotton filling:

After the front and back pieces are cut, they can be filled with cotton. In order to prevent cotton from being misplaced and curled inside, lead wire can be used to fix it inside. The lead wire does not need a dense needle, as long as the cotton remains intact.

5. Sewing:

The thickness of cotton should be controlled by everyone according to actual conditions. Fill it thicker in the north, and make sure that a pair of cotton trousers is more than two kilograms of cotton. There are relatively few in the south, basically one kilogram to one and a half kilograms. After the cotton is filled, the surplus cotton should be torn off along the cloth to facilitate sewing. Then clean the surface of the cloth with a brush.