If you just add an ordinary formaldehyde test, you don't need any qualifications. Just buy a better cmc-certified testing instrument online. If you want to apply for cma third-party certification, you need CMA qualification, and the joining fee should be not low. It seems that just applying for CMA third-party qualification will cost 50W.
It is suggested that instead of adding the formaldehyde prosecutor, it is better to join the formaldehyde prosecutor directly. Now the formaldehyde controller has provided non-certified formaldehyde detection instruments, which have also been reviewed by relevant state departments. Joining Zhongke East Asia Nano includes formaldehyde detector, formaldehyde treatment scheme, construction equipment, construction technology training and so on.
If an individual applies for testing a company, it is divided into the following stages:
1. In the application stage, the quality inspection agency applies and submits relevant materials;
2, the initial investigation stage (when necessary), according to the requirements of the specification to help quality inspection institutions to establish and improve the quality system, and make it run normally;
3. In the pre-trial stage (if necessary), conduct simulation review according to the requirements of the specification, find nonconformities and require rectification;
4, formal review, the competent authorities to form a review team to review the application of certification bodies;
5. At the stage of declaration, examination and certification, the metrological administrative department of the relevant people's government shall examine and approve the qualified product quality inspection institutions, issue metrological certification certificates, and agree to use uniform metrological certification marks. Issue a notice of unqualified evaluation results;
6. In the review stage, the quality inspection institutions shall conduct an expiration review every five years, and each institution shall apply to the original license-issuing department six months in advance, and the materials required for the application are the same as when applying for certification for the first time;
7. In the stage of supervision and spot check, the metrological administrative department may arrange supervision and spot check on the units that have obtained the metrological certification certificate within the validity period of five years, so as to promote the construction of quality inspection institutions and the effective operation of the quality system.