Material preparation: adhesive tape, spoon, a bowl of water and a cartoon character printed in color.

1. Press this printed paper with a spoon and let it stick to it, as shown below.

2. Then, you can get this printed cartoon character on this piece of white paper and cut it out, as shown in the figure below.

3. Then pour it into warm water and rub off the white paper at the back to form a thin layer of white paper, as shown in the figure below.

4. Finally, after evenly grinding off the white paper at the back, take it out and stick it anywhere you like, as shown below.

Sticker introduction:

1, Introduction:

Printing all kinds of pictures and photos on the back dry tape is a common sticker on the market now, and it is also a fashion product deeply loved by teenagers and young people. Can be pasted on stationery, cups and bowls, furniture, electrical appliances, metal products, porcelain, motor vehicles or non-motor vehicles, mobile phones, advertising trademarks, industrial indicators and other multi-element series products, with a very wide range of applications.

The sticker is only as big as a coin of 10p. Users only need to stick stickers with Bluetooth function on some valuables, and then they can locate the distance of these valuables through smart phone applications, so that users can stay away from the trouble of not finding things. This sticker is not a piece of paper in essence, it is a Bluetooth signal transmitter.

2. Operating instructions.

Remove the environmental protection film on the surface of the water sticker, cut out the required picture with scissors, scrub the surface of the sticker, soak the picture in water for about 30 to 60 seconds, and move the picture and the backing paper by hand. As long as the painting can be separated from the backing paper. It is best to keep the water temperature at 20 to 35 degrees.

Take the picture out of the water and align it with the required sticker position. Hold the screen surface with your left hand, and slowly pull out the backing paper with your right hand. When the required position of the picture and the attached object is accurate, scrape off the water under the picture with rubber or a professional water sticker scraper and scrape the picture flat. After scraping the water, wipe the sewage on the surface of the sticker with a dry towel to complete the posting.