1, how to draft a work
Imagine determining the specific description of the draft layout on the screen and drawing a black-and-white effect. A part of white powder can be obtained. For beginners, the manuscript is more finely carved and more economical. If you carve a symmetrical manuscript, draw half the picture.
2. Cutting and carving
If you carve a knife. To set up the screen and paper, fix them on the four corners of the wax tube with a stapler to ensure the accuracy of the image. Carve the details or key points of the bird carving of the five senses of the characters slowly, and then write the same order from top to bottom, from left to right, from small to large, from fine to coarse, from local to whole. Be sure to avoid repeated knife cutting, instead of carving on the spot and tearing your hands, otherwise the burr of paper-cutting will affect the appearance. Micro laser cutting machine completely solves this situation, mortgage.
When cutting, you need a piece of paper clippings of electro-optic paper, matt paper, because the paper is smooth and easy to open, and single rice paper and art paper are thin, stuffy and damp, easy to stick together and difficult to find. A good cardboard mortgage must be carved first, so that the papers can be folded in half, and then gently lift the angle of the first one, and at the same time blow the mortgage loan with your mouth to help open it.
4. Paste
After the mortgage is gone, the demand for finished stickers is easy to save. There are two ways. The first paper-cut is dipped in the paste, and the paper is glued from the inside out with a brush or a thin piece of wood. This method can't make all paper-cuts stick flat, but its advantage is that it is easier. The second paper-cut is flattened on the paper, and then dipped in thin paste with a combination brush. Euphemistically ask if your paper is a horizon brush. Be careful not to wrinkle the paper brush. There must be less paste on the brush. Soon, the paper-cutting paste brush fixed at the back will gently flatten the documents supported by the sticks of all paper-cutting units. Gently lift the flat save folder. External sticky paste, white latex.
5. Complete
Cutting and carving are sometimes damaged by knives, especially when carving paper. Is it a large area that is difficult to solve, such as a small area? Local carving was damaged and new carving was added. Color paper-cut is not covered by mistake, and it must be engraved on the damaged part to capture some and then dyed. You must know what you are doing before the operation.
6, copy-smoke like the sun
There are two ways to copy. One is to cut a piece of paper and flatten it until it is soaked with water and contains no water drops. At the same time, carve paper and white paper, stick it on a wooden block, and then steam the paper on an oil lamp, but not too close to avoid burning the lamp. If you need a lot of production, you can take the blueprint of the sun: the original rotten, brush the liquid layer (red blood salt and aqueous solution) white, and the sun is sandwiched between two pieces of glass to bask in 3? Stick together for a few hours. After the liquid medicine is developed, rinse the paper with clear water. Can be copied.
Instead of traditional knife-carving laser cutting, Jinan Micro-carving Laser cooperates with the majority of paper-cutting manufacturers, and is committed to: VDIAO Micro-carving Laser specializes in producing velvet paper-cutting laser cutting machine, large-format paper-cutting laser cutting machine, paper-cutting laser cutting machine, figure paper-cutting, flower-and-bird paper-cutting, Facebook paper-cutting, double happiness paper-cutting, zodiac paper-cutting, paper-cutting, mounting, paper-cutting hanging money, paper-cutting calendar partners An, Shaanxi, Shandong,