The video tutorial video of the cutting method of culottes is as follows:

Material: 1.8m, belt: width 9cm* length 70cm, 2 pieces.

Clipping graph analysis

1. Cut the cloth according to the pattern to make the left pants and right pants symmetrical.

2. Except the waist and hem, everything else is wrapped.

3. Sew the left and right underwear together and mark the entrance of the elastic band with a ruler.

4. Put the left and right pants in the middle and sew them on the crotch with 1cm.

5. Unfold the seam and flatten it.

6. Carve part of elastic belt into a square.

7. When the seams between legs are consistent, fix them with pins and sew the legs together.

8. Fold the hem into three folds according to 1cm and iron it.

9. Sew it on the hem.

10. Fold the waist by 4.5cm and flatten it.

1 1. Draw lines on the waist line at intervals of 1.5cm.

12. Put a notch every 1.5cm around the waist.

13, with two elastic bands around the waist.

14. Sew one end of the elastic waist together as shown in the figure below.

15, that's it.

Method 2:

1. Fold the cloth in half from left to right, then fold it in half from top to bottom, and then put the pattern on it to cut out 2 skirts and 2 sleeves. The rest of the cloth is used to cut three decorative cloths with a width of 6.5cm and a length of 30cm, 38cm and 45cm. One side of each of the three pieces of decorative cloth is treated with three-fold seam, and the seam is 0.5 cm.

2. Three decorative cloths after hemming are sewn and fixed on the front skirt piece from the top 15cm. The top of the front piece and the back piece of the skirt are sewn in three folds to form the perforation channel of the elastic band. Sew the hem of the front and back pieces of the skirt with a Z-needle. Make a three-fold seam on the cuff of the sleeve fabric, with a seam of 0.5 cm.

3. The armhole is also three-folded, sewn into a hole through which the elastic band can be worn, and the elastic band is cut into two short elastic bands of 13cm and two short elastic bands of 14cm. Insert two elastic bands of 1.3cm into the top of the front and back pieces of the skirt and sew them together. Insert two 14 cm elastic bands into the left and right armholes respectively, and sew and fix them.

4. Wrap two skirts and two sleeves together and sew them after the bead needle is fixed. The skirt is folded in half along the shoulder line and stitched on both sides. Trim the raw edge, fold the skirt hem by 0.5 cm, then fold it by 3 cm, and sew a circle to complete the production of this children's nightgown.