1 Use a repair tool to remove acne marks and eye bags on your face. But don't remove scars and pores. (You can compare the original skin color with the final skin color)

Step two:

Add a gradient layer to a simple repair layer.

Step 3:

Adjust the color scale to enhance the contrast between light and shade of photos. But remember, don't make it too black or too white, it still looks gray as a whole.

Step 4:

Once the layer is copied, the layer is set to soft light. (For better understanding later, it is suggested to rename the copy of 1 layer to Layer 2), as shown in the figure.

Step five:

Select Layer 2 and select → Other → Keep Gao Fancha in the filter. (the specific radius is good to feel the tune. )

Step 6:

Select the layer 1, and select → Sharpen → Smart Sharpen in the filter. This step is very important, and the texture of the skin depends on this step. After adjustment, the skin texture is basically clearer, and the sense of vicissitudes comes out)

Step 7 (optional):

If you feel that the texture of the skin is still not enough, choose the second layer and repeat the sixth step.

Step 8:

Select a color hierarchy and add a channel mixer.

Step 9:

Check the monochrome in the Channel Mixer, and then fine-tune it according to the photo feeling in the window.

Step 10:

The two-layer color scale and the channel mixer are mutually adjusted, and pay attention to the subtle changes of the photos while adjusting.

Step 11:

Select the first layer and select the highlight area of the bridge of the nose. Copy and paste the selected area as a new layer. (You can use the shortcut keys Control+C and Control+V)

Step 12:

Through the curve, the highlight layer of our newly-built nose bridge is highlighted as a whole.

Step 13:

Change the nose bridge highlight layer property to soft light. This makes the whole look much more natural. Then gently decorate the extra edges with an eraser.

Contrast before and after.

Step 14:

Usually in addition to the bridge of the nose, cheekbones, brow bones, forehead and other places also need to improve local brightness. Select the part to be highlighted and repeat steps 1 1 to 13.

Contrast before and after local highlighting:

Step 15:

Final details.

Just look at the overall effect of the photo, adjust the tone, color scale and channel mixer.

2. how to use ps to process people's photos into this texture?

1, open the original material, first tick out the characters with the pen tool, press Ctrl+Enter to change the path into a selection, and press Ctrl+J to copy the characters to a new layer.

2. Press Ctrl+M to adjust the curve of the cutting graph, and the value is 47,60 3. Create a new layer and fill it with the color of #0A6A60 4. Cut off the upper part of the skin of the character's head and copy it to a new layer. 5. Set the foreground color to emerald green (the color of water can be set according to the needs of drawing) and the background to white, and select the menu: Image >；; Adjust > gradient map.

Adjust monochrome images with contrast between light and dark. 6. filter >; Artistic effect > plastic packaging, the data is adjusted according to personal needs, mainly to extract highlights with water effect, so it is very possible to adjust the highlight density and evacuation of the face made of water. According to the characteristics of water, the information that human eyes can receive is only the highlight and the darkest part, and the other parts are transparent.

7. Select the copy of Layer 3, press Ctrl+Alt+Shift+~ to bring up the highlighted selection, then press Ctrl+Alt+Shift to click on the copy of Layer 3, thus subtracting the off-map selection, and then create a new layer 4 and fill it with white. 8. Hold down the Ctrl key and click Layer 4 to convert it into a selection. Press Ctrl+Shift+I to reverse the selection, and press Delete to delete the clean point.

9. Turn Layer 4 into a selection, select a copy of Layer 3, and click the Mask button (you can hide the dark tone of the layer). Then use a brush to erase the extra highlights on the characters. Similarly, the copy of Layer 3 is masked to erase the extra highlights.

10, layer 3 is set to "positive overlay", layer 1 creates a mask to keep clothes, press Ctrl+B to turn clothes green, and find a collage of pictures about water. Find the material of water droplets on the Internet.

1 1. It is best to find water with a black background. If it is a white background or other colors of water material, you can desaturate or reverse the color to turn the background into black. Setting the layer property to filter color will mask black, leaving only white and transparent water. When collaging, we should look at the direction of water to find a suitable position for collage, and use a mask to handle the connection position between water characters. 12. Finally, the background color is processed.

3. How to make a character feel with ps?

Brief analysis of pictures: 1. Judging from the makeup photos of the above NBA players, blacks can highlight the texture of skin more than whites because of skin color and other reasons.

2, more hair will highlight the texture than less hair. 3, the facial contour is clear, which will be more textured than the steamed stuffed bun face.

The final effect is as follows: Step 1: Remove acne marks and eye bags with repair tools. But don't remove scars and pores.

(You can compare the original skin color with the final skin color) Step 2: Add a gradient layer on the simple repaired layer. Step 3: Adjust the color scale to strengthen the contrast between light and shade of photos.

But remember, don't make it too black or too white, it still looks gray as a whole. Step 4: Copy the first layer and set it to soft light.

(For better understanding later, it is suggested to rename the copy of 1 layer to Layer 2), as shown in the figure. Step 5: Select the second layer and select → Other → Keep Gao Fancha in the filter.

(the specific radius is good to feel the tune. Step 6: Select the layer 1 and select → Sharpen → Smart Sharpen in the filter. This step is very important, and the texture of the skin depends on this step.

After adjustment, the skin texture is basically clear, and the sense of vicissitudes comes out. Step 7 (optional execution): If you feel that the texture of the skin is still insufficient, select Layer 2 and repeat the steps in Step 6. Step 8: Select the gradient layer and add the channel mixer on it.

Step 9: Check the monochrome in the Channel Mixer, and then make fine adjustments according to the photo feeling in the window. Step 10: Adjust the two-layer color scale and channel mixer, and pay attention to the subtle changes in the photos while adjusting.

Step 1 1: Select the layer 1 and select the highlight area of the bridge of the nose. Copy and paste the selected area as a new layer.

(You can use the shortcut keys control+c, control+v) Step 12: Highlight our newly created highlight layer of the bridge of the nose through the curve. Step 13: Change the attribute of the highlight layer of the bridge of the nose to soft light.

This makes the whole look much more natural. Then gently decorate the extra edges with an eraser.

Contrast before and after. Step 14: In addition to the bridge of the nose, cheekbones, brow bones, forehead and other places also need to improve local brightness.

Select the part to be highlighted and repeat steps 1 1 to 13. Comparison before and after local brightening: Step 15: Final details modification.

Just look at the overall effect of the photo, adjust the tone, color scale and channel mixer. The last layer is as above.

4. How to color the characters so textured?

There are several points to pay attention to: 1, early shooting-it requires high camera configuration and personal skills, and reasonable exposure value setting, reasonable focusing and the use of virtual and real contrast can strengthen the character's texture; 2. Post-production-a method to enhance the texture in post-production. Most of us use PS tools for image processing. First of all, when using PS tools, we should pay attention to several requirements to enhance the texture: a, the density (brightness and contrast) should be greater than that required for general photo production; B, USM sharpening is appropriate on the premise of reasonable exposure processing; C, using real people and fuzzy background to highlight the texture of the main object. 3. Others-pre-shooting is the cornerstone of a strong texture picture. If the preview is out of focus, or the aperture value is too large or too small (for example, Nikon's camera aperture 22 has no aperture 18 effect), it will affect the texture of the picture; Don't overdo it later, just strengthen it appropriately.

I'll tell you a way to directly improve the texture. Personally, I came up with a good effect: copy the background layer-choose a copy of the background layer-keep the Gao Fancha of the filter (the value can't be too large, just the outline has clear lines)-change the layer mode to overlay (if the effect is not satisfactory, you can copy the copy of the background layer several times). So you don't have to sharpen your knife with USM.

I hope I can help you!

5. How does 5.Photoshop bring up textured portrait photos?

1. Create a curve adjustment layer (directly on the panel or layer >); ; New adjustment layer >; Curve) layer blending mode changed to color filter.

Press d to restore the default background color, click the curve adjustment layer, and Ctrl+ Backspace to fill black. Paint your eyes with a soft white brush (remember it's on the curve adjustment layer). If the eyes are too bright, reduce the opacity, here to 55%.

2. Create a new black and white adjustment layer as before. The layer blending mode is set to positive overlay.

3. then Ctrl+Shift+Alt+E create a new stamp layer, and click image >; ; Adjust >; Shadow/highlight, in order to brighten the image in this step, move the shadow triangle to the right and adjust the parameters yourself.

4. Ctrl+Shift+Alt+E again to create a new stamp layer, and select the dodge tool, and the default setting will be fine. Suitable for eyes, especially around eyes, as well as nose bridge, cheekbones, forehead, lips, chin tip and neck.

5. Continue Ctrl+Shift+Alt+E to create a new stamp layer, and click Filter >; ; Sharpen > USM Sharpen. The parameters are as follows. There are slight lines on the characters in this step, but the sharpening value should not be too high, otherwise it will be ugly. Of course, you can also reduce the sharpening effect by reducing the opacity.

6. Create a new hue/saturation adjustment layer and reduce the saturation parameter.

7. Create a new gradient mapping adjustment layer and change the layer blending mode to soft light. This step is to strengthen the contrast.

8. Create a new curve adjustment layer and move the white triangle representing the highlight to the left to increase the bright area.

9. This step is very important and the key to making the picture artistic.

Create a new gradient map adjustment layer, select the gradient color as shown in the figure, and change the layer blending mode to soft light to reduce the opacity until the effect is satisfactory.

6. How to repair a character's skin texture with photoshop?

1. First, I make a choice for the character's skin. Here I use the quick mask tool. You can use other tools if you are interested. .

2. Add the mask to the unselected selection, correct the transparency selected by the quick mask, and copy the two layers for later use.

3. Use the first layer of the copied skin to "filter"/"blur"/"surface blur", and you adjust the data according to the picture in your hand. The data is not a fixed value, depending on the adjusted skin effect.

4. Select the copied second layer, put it on the top layer, and execute Filter-Other-Customize. The data execution effect here is to sharpen the details. You can study the specific parameter settings and consult the principle of custom filters.

5. Set the blending mode of sharpening layer to light color, and adjust the opacity with the mouse until you are satisfied.

However, this method is suitable for the mask with inconspicuous "acne" on the face, and this method can be used after a small area can be repaired with a repair tool.