1. Install hinge cup.
A. As shown in the figure, there will be a big hole in the cabinet door before installing the hinge cup. This hole is determined according to the type and size of the hinge. You can compare them first, draw the installation position and then punch holes.
B, the common method of installing hinge cups is to install and fix them with self-tapping screws of flat countersunk particleboard.
C, install the hinge cup press-fit type I, the hinge cup is provided with an expansion plug, and the hinge cup is fixed after being pressed into the reserved opening of the door plate by a machine.
D, install the articulated cup without tools, and there is an eccentric expansion plug on the articulated cup. After manually opening the door panel, the hinge cup can be installed and removed without pulling the decorative cover with tools.
E, install the hinge cup press-fit type II, and the hinge cup is equipped with an expansion plug. After manually opening the door panel, screw the expansion plug to fix it.
2. Installation of hinge seat
A. Similarly, the hinge seat should be pre-perforated. The holes can be marked after the more important positions (note that the hinge seat is installed vertically as shown in the figure).
B the hinge seat is fixed with screws, using particleboard screws, European-style special screws or pre-installed special plugs, and then screwed in with a screwdriver.
C, the hinge seat is press-fitted and fixed. This is very simple. Just press the hinge seat with the expansion plug with the machine.
3, cupboard door hinge installation
A, tool-free installation of cupboard door hinges, suitable for quick-loading hinges. By locking, the door panel can be installed and removed without any tools.
B, screw on the cabinet door hinge, insert the hinge cup on the cabinet door into the common hinge, and then fix it with screws.
C. Specific installation steps for installing the cabinet door hinge without tools (for installing the cabinet door hinge with screws, please refer to the other half step on the right side of the figure).
Step 1: Connect the hinge seat and hinge arm according to the arrow mark in Figure 1.
Step 2, buckle the tail of the hinge arm down.
Step 3: Press the hinge arm lightly to complete the installation.
Step 4, press gently at the position shown by the arrow to remove the hinge arm.
In fact, hinge installation is not difficult. What is difficult is the choice of hinge installation size and minimum allowance for cabinet door installation. If you don't choose it properly, the cupboard door may not close and bump.