1, the reason why the balance placement environment is too poor, it is necessary to change the balance placement environment;
2. If the parameters in the instrument settings of mettler electronic balance ME204 are not set properly, please use the "reset" function to exit the menu correctly and return to the factory settings;
3. There may be hand temperature in the weighing room, so please try to reduce this artificial factor.
4. The temperature of the object to be weighed should be isothermal with the balance, and then put it into the balance for weighing.
5. The sample has a variety of functional characteristics such as water absorption and water release. You can refer to "mettler toledo Balance Correct Weighing/Electronic Analytical Balance" to overcome the above influence, so as to correctly weigh and use the microbalance.
6. The environment in which the balance is placed is too bad: the environment in which the balance is placed is also very important. It is necessary to improve the above environment and close the windproof window in the weighing room before the mettler electronic balance ME204 can work normally.
7. The direction of water absorption and drainage of the desiccant used is different, which causes the change of air buoyancy and leads to unstable weighing. Desiccant in the weighing room should be removed to ensure a stable weighing environment;
9. No weighing plate is installed: after power failure, install the correct weighing plate first, and then open the balance;
10. Wrong weighing: use the correct weighing according to the balance.
Through the analysis of the above aspects of the instrument chain network, the reasons and solutions of the unresponsive display of mettler electronic balance ME204 after starting up are understood, and the problems are found and solved. Or consult the sales staff of instrument chain network before purchasing mettler electronic balance ME204, and we will provide you with detailed answers.