1. Remove the lower frame with a flat screwdriver.

2. Connect the live wire, neutral wire and ground wire of the power supply to the L end, N end and ground wire end of the socket respectively. The conductor is made of copper wire with a cross-sectional area of 1.5-4 mm, and the drawing length is 9-11mm. ..

3. Install the mounting bracket into the bottom box on the wall and fix it with a screwdriver.

4. Button back the face frame.

Bull switch socket installation, prepare switch socket (i.e., socket with switch), with red wire and live wire connected to L, yellow wire and ground wire connected to L 1, and blue wire and zero wire connected to L2; The specific operation steps are as follows:

1, prepare the switch socket (i.e. socket with switch).

2. The red line is connected to L, the yellow line is connected to L 1, and the blue line is connected to L2.

3. The live wire jumper on the switch jumps to the L on the socket.

4. Control line of L2 lamp on the socket.

5. The zero line of the lamp wire comes out to connect the switch.