After water injection, the water did not dry after disinfection was stopped, and the disinfection time was not enough; Second, all indicator lights are normal, but the heating plate is not hot; When the disinfection indicator flashes (or when disinfection is pressed for drying), the machine cannot work normally; Fourth, it doesn't work during disinfection, and it directly turns to drying during disinfection and drying; The indicator light of the health pot suddenly went off, so it was impossible to boil water. The health pot has just started to boil water 1-2 minutes, and there is a hint of boiling, or the power is automatically turned off. The health pot is leaking. Small faults such as damaged base, lid and screw hole of health pot A: Common faults mainly include the following:

E00 fault code is mainly related to the following aspects: the heating filament is blown, the overheating fuse TSl is blown, and the driving circuit of the heating lamp power supply is faulty.

Power on and power off. It was mainly caused by the fault of 105 nonpolar capacitor, and the fault was repaired after replacing 105.

The indicator light suddenly went out.

The health pot has just started to boil water 1-2 minutes, and there is a hint of boiling, or the power is automatically turned off.

There is electricity leakage.