Just like the newly poured floors of rural self-built houses, water must be used for maintenance, and concrete must be watered every day for maintenance at the initial stage of solidification. The key goal is to better prevent cracks. The key to the maintenance of floor tiles after paving is to avoid excessive convergence of paving raw materials and interference with floor tiles, avoid peeling of paving raw materials from floors or floor tiles, and reduce a series of product quality problems caused by factors of thermal expansion and contraction! Water can fully wet the common raw materials of ceramic tiles,
Such as concrete, tile glue and other raw materials. And the maintenance of tap water can delay the opening time of such materials and improve the bonding quality! Because the hot temperature not only makes people feel uncomfortable, but also accelerates the initial setting of mixed mortar and improves the cracking conditions. If the concrete sets too fast, it will reduce the adhesion between the tiles and the wall, thus aggravating the situation that the tiles bulge and fall off. Therefore, it is necessary to water and maintain the pasted tiles, so as to make them more solid and more quality and quantity! If the pavement is not waterproof, the tiles are not suitable for water conservation after paving.
Because water will flow down the gap between the tiles, and if the pavement is not waterproof, it may leak water, which may directly affect the bottom of the building, so it is not recommended to carry out maintenance work in this case. Wall tiles should not be watered and maintained by dry hanging stone or ceramic tiles attached to materials. Because the dry hanging stone is pasted with main keel, super glue and other materials, it may cause adverse damage to this auxiliary material after encountering water, and the tiles pasted on the materials cannot be cured with clear water.