After the electric kettle is electrified, the indicator light is on, but it is not in a heating state. Most of the reason is that there is something wrong with the electric heating tube or the link part. When the electric heating tube is damaged, you need to call after-sales or go to a physical store to replace the new electric heating tube.

If hot water burns the power plug assembly, the contact will be seriously corroded or deformed, which will lead to poor contact. At this time, it is necessary to disassemble the switch box for cleaning and maintenance, and then replace it with a new one according to the internal damage.

Frequently asked questions about electric kettle

The water in the electric kettle is boiling, but the automatic power failure should be caused by the deformation of the temperature sensor or the blocking of the switch connecting rod, which leads to the failure of the reset switch. If the temperature sensor is deformed, the convex angle of the temperature sensor's uvula can be bent again to make it push the switch connecting rod back to normal.

If the action of the switch connecting rod is blocked, it is necessary to find out the blocked part or foreign body, then take out the foreign body and correct the position. After the electric kettle is electrified, the indicator light will not light up and it will not heat up. You can see whether the bimetallic reed is pressing the switch lever. If yes, bend it directly with tweezers to make the distance 0.5-1mm.