How to disinfect the scraping board?
1, try to avoid contact with perfume when cleaning.
Spine jewelry should avoid contact with perfume, chemical solution, soap and human sweat, which contains salt, volatile fatty acids and urea. Spent stone is exposed to too much sweat. If it is not wiped clean immediately after wearing, it will be eroded, destroy the outer layer and affect the original brightness. Avoid prolonged direct sunlight. Spine stone should avoid sun exposure, because the main component of Spine stone is calcite. When it encounters thermal expansion, the molecular volume increases and will be weathered after a long time. In the natural state, most of the Spent Stone exists on the surface, which will basically be weathered and the output is extremely low, which is one of the reasons for the high price of Spent Stone and its products. Avoid collision with hard objects. Compared with jadeite, Spine stone has lower hardness and is more easily broken. After the fracture, sometimes the cracks are invisible to the naked eye, but in fact, the molecular structure of the surface layer of Spine has been destroyed and dark cracks have appeared. Sometimes a slight collision will leave a shallow pit on the surface, which is more common. Avoid dust as much as possible. If there is dust on Spencer's stone surface every day, clean it up with a soft brush. If dirt or oil stains are attached to the bian stone surface, it should be scrubbed with mild soapy water and then rinsed with clear water. Chemical degreasing agent solution cannot be used.
2. Wash the scraper with clear water to avoid falling.
Scraping boards should be disinfected by one person and one board to avoid cross infection. The scraper of buffalo horn is generally wiped and disinfected with 1: 1000 bromogeramine, 75% medical alcohol or 0.5% iodophor; Scraping boards for stone, ceramics and jade can be disinfected at high temperature, high pressure or boiling in addition to the above disinfection methods. Be sure to wash it with clean water, not chemical lotion, the horns are fragile, so be sure to pay attention to protection! Many friends have reported that the speakers used are bent or deformed to varying degrees because the horn scraper is afraid of humidity.
3. Wash the scraper with light sugar salt water.
That is, some things to pay attention to when scraping. For example, a certain amount of medium must be applied to the surgical site first. This can not only reduce the friction between the scraper and the skin, reduce the damage to the skin, but also enhance the permeability and increase the therapeutic effect; Scraping therapy is not suitable for patients with some special conditions such as hematological diseases, infectious diseases and serious organ damage, or under the strict guidance of doctors; Don't take a cold bath within 30 minutes after scraping. It's better to drink a cup of warm water after scraping and rest 15-20 minutes.
Use of scraper
1. Usage of scraper on the back of scraper
Used for scraping back and dredging back meridians. It acts on the thick parts of the whole body muscles, dredging meridians, moistening the whole body skin, strengthening the body and prolonging life. Scraping boards with a slope of 45 degrees, with the plane facing downwards, should be stretched as long as possible, from inside to outside, from top to bottom, scraping in sequence, with moderate and even force, and directly scraping on human skin meridians repeatedly. As long as a few minutes, wherever there is a source of the disease, red-purple petechiae or dense red-purple papules will appear under the light, and in the worst case, black lumps will be visible, and there will be pain. If there is no response, it will be painful.
2. Scraping strength and direction of scraper
Refers to the power of using the scraping board. The greater the force, the easier it is to attack and the higher the sensitivity of the patient; The lighter the force, the shallower the scraping plate cuts into the skin, the less likely it is to scab, and the lower the sensitivity of the patient. Strong intensity may cause local skin ulceration, while weak intensity cannot achieve therapeutic effect. Therefore, the requirement for strength is "heavy but uneven, light but not floating". Refers to the direction of the force acting on the scraper. The force comes from the back of the scraper. When scraping with thrust, it is very irritating to the skin, and it is easy to scrape. The strength comes from the front of the scraper. When scraping with pulling force, it is not easy to scrape out, but the patient will feel more comfortable.
The function of scraper in scraping
1, Shu Jing Huoxue Guasha Board
People with menstrual disorders, dysmenorrhea, abdominal distension and pain, and chest tightness want to achieve the effect of dredging channels and activating collaterals, promoting blood circulation and relieving pain through scraping. It is suggested to use scraping slate, and scraping and activating blood agent as lubricant when scraping. This is because bian stone contains a variety of trace elements beneficial to human body, which can generate a large number of ultrasonic pulses when rubbing against human body, and has the effects of dredging collaterals and warming yang, removing blood stasis and relieving pain, dispelling cold and removing dampness, calming nerves and calming convulsions.
2, scraping plate scraping the abdomen can be laxative.
Long-term constipation will not only affect the digestion and absorption function, but also cause the body to absorb a lot of toxins. Patients can scrape the surface of the plate from top to bottom and from left to right in the abdomen. It should be noted that if the internal organs droop, they should be scraped from the bottom up.