Current location - Health Preservation Learning Network - Health preserving recipes - What are the advantages and disadvantages of dry circulation system and wet circulation system?
What are the advantages and disadvantages of dry circulation system and wet circulation system?
Dry circulation system b wet circulation system

Superiority of story height: The overall completed surface of A is increased by about 30mm, which greatly enhances the sense of space. The thickness of the overall finished surface of B is increased by 60-80mm, which has a great influence on the story height.

Building load: A there is no cement backfill layer, which will not increase the building load; B the thickness of cement backfill layer increases the building load (100- 120kg/m2).

Heating speed: the first heating time is fast, the time is about 30-40 minutes; B the heating time is about 4 hours, which is relatively inert.

Energy saving and emission reduction: A can generate the same amount of heat at the water temperature of 40-45℃, saving about 40% fuel cost compared with wet paving; B The water temperature is about 45-65℃, but the overall heat dissipation is balanced.

Duration: A site is paved quickly and does not need maintenance. Generally, the B process can be completed in one day and the construction can be completed in two days, plus the concrete curing period is more than 7 days.

After-sales maintenance: A leakage is easy to detect and maintain; Concealed works are difficult to detect and maintain.

Retail price: A200-230 yuan /m2 B 120- 150 yuan /m2.

Assembly rate: A has a high degree of prefabrication, conforms to the national evaluation standard of prefabricated buildings, and can realize dry construction and pipeline separation, and scores two points; B has no score in the evaluation standard of prefabricated buildings.

Standardization: A standardized module, with high site construction quality, and B non-standardized. There are a lot of uncertainties in site construction, which is far from the design.

Intelligent temperature control: A can realize intelligent temperature control in different areas; It is difficult for the whole house coil to realize intelligent temperature control in different zones.

Utilization rate: short development time, low popularity, only 20% utilization rate; B Long development time, mature technology and 80% utilization rate.