1. First unplug high-speed blender to ensure safety.

2. Turn the machine upside down, with the bottom facing up, and find the screw at the bottom.

3. Unscrew the screw counterclockwise with a screwdriver and remove the bottom shell.

4. Take out the internal parts carefully, and be careful not to damage or lose any parts.

5. If the bottom parts need to be repaired or cleaned, they can be treated as needed.

6. When cleaning or repairing the bottom parts, carefully put all the parts back in place.

7. Reinstall the bottom housing in the reverse order and tighten the screws.

8. Turn high-speed blender back to the front, plug in the power supply and turn on the high-speed blender.

Why give this answer:

Removing the bottom is convenient for users to clean, repair or replace the parts at the bottom. However, please pay attention to safety to avoid damage or loss of parts.

Practical solutions and countermeasures:

Before disassembling the bottom, it's best to check high-speed blender's operating instructions to understand the specific disassembly steps and precautions. In addition, during disassembly, attention should be paid to avoid damage or loss of parts. If you are not sure about your operation ability, it is best to ask a professional for maintenance or cleaning.

Extended description:

High-speed blender is a high-tech kitchen appliance, which can break hard ingredients into tiny particles, which is very convenient. But in order to ensure its normal operation, it needs regular maintenance and cleaning. Dismantling the bottom is one of the important steps, which can facilitate users to clean or repair the bottom parts. But pay attention to follow the correct operation steps to avoid unnecessary losses.