Usage and preparation of Brita filter kettle 1 Installing filter element
Pour cold water into a clean pot, tear off the packaging bag of the filter element, immerse it in cold water, gently shake it to remove bubbles, then take out the filter element and pour out the water.
Put the filter element into the hollow part of the funnel, press it down and clamp it firmly.
2. Fill the kettle with water
Tap water is injected into the kettle through the water injection port, and if there is no water injection port, the top cover is directly removed for water injection.
Dump the water filtered in the first two times, and activate the filter element in the third filtration, so that you can enjoy cleaner and purer filtered water.
3. Filter replacement display adjustment
When you start to use the filter kettle, you need to use the display on the cover to record the use of the filter element so as to replace it in time.
Press and hold the "Start" button for about six seconds until all four bars appear on the display, and the dot in the lower right corner begins to blink.
About every other week, a bar disappears on the display. When all four bars disappear and the arrow starts flashing, it means that a new filter element needs to be replaced.
Frequently asked questions about Brita filter kettle: Does Brita filter kettle still need to be boiled after filtering tap water?
A: It is suggested that friends use tap water to filter before boiling in an electric kettle.
Q: How long does it usually take a filter element?
A: It is recommended to use a filter element within one month.
Q: There are black particles in the filtered water. Does this affect the use?
Answer: These particles will not affect your health. If you want to remove these particles, it is recommended to put the filter into water and shake the filter 10 to 12 times before loading the new filter. If necessary, repeat the above actions, filter twice and then return to normal use.
Brita filter kettle evaluation [shy R] thinking-it is really difficult for modern people to drink water. Look at their new electric kettle. If it is not commonly used, just boil some water, and water stains will be found in less than half a year. Moreover, we are still a new community, built on 20 15, with newly paved pipelines and poor water quality. The water problem in China has been puzzling. Tap water has never reached the reference standard for direct drinking water. I know that in foreign countries, you can directly turn on the tap to drink water. How many harmful substances do you think China water can remove even if it is boiled? If simply boiling can make the water quality better, will there be so many drinking water problems?
[Ao R] decided-so I bought this kettle without hesitation, and then waited for the merchant to deliver it. About three days later, the kettle arrived, and the speed was very fast. Today, I saw that the activities on the day of buying were gone. I am very happy, hahahaha, I feel I have found a bargain! ! ! Actually, it's not expensive to convert. Search casually on Taobao. A kettle costs tens of dollars, hundreds of dollars. It costs tens of dollars to change this filter once a month. According to this price/performance ratio, it is really high.
[Blow Kiss R] Cost-effective-first of all, I want to say that we have installed a 3M direct drinking water purifier. At that time, all the expenses added up to 2688, and three people drank it. The pp cotton filter screen of the first cylinder is changed once every six months, and the price is not high. The activated carbon filter in the last cylinder is the whole cylinder. Taobao's cheapest one is 680, official, 680. Let's just say the maintenance cost of the program, regardless of the whole set of purchase price. A filter element needs 30 pieces of pp cotton, and 60 pieces are there. 1099 The filter element was not officially bought, so there is no guarantee of authenticity. Then these expenses will be 60+ 1099 = 96.583 per month, and this filter bucket only needs 6543. It's half cheaper. I spent an extra 2688 on installing a sleeve for direct drinking water, which is the extra money. Now think about it, if I had known this water filter, who would have filled it with such gnawing drinking water? Shopping and maintenance are really expensive! ! ! ! ! ! And direct drinking water can only be drunk, not to say that it can be used for bathing. This amount of water is not enough. In other words, what's the difference between using a water filter? Besides, it only takes 5 minutes for this water filter to filter a bucket. I'm really not Brita's support. I really have a comparative lesson, blood and tears. So I didn't buy it when it was time to change the filter bucket this year. I just let the drinking water out and filter it for the filter bucket.
[Color R] taste-to be honest, this taste is first-class. Although it is sweet in the throat and can be drunk directly, the taste is still poor. Many people can't taste the water. To tell the truth, there was no direct drinking water before. The water boiled with tap water tastes really bad. When I drink in my throat, I always feel rustling. Very uncomfortable. I can't drink much water. ! ! ! ! The filtered water tastes really good. I can drink 500 ml in one breath. Please don't call me buffalo. Ha ha ha ha ha ha ha ha ha. Besides, it's hot. Drinking water is really a serious problem! ! ! ! [Anger R] [Anger R] [Anger R] The blackboard must be knocked here! ! !
[Meng Meng da R] How to use it-There is a way to activate the filter of this kettle.
1. First, fill the bucket with half of water, do not put the filter element cover, hold the filter element by hand, directly immerse the filter element in the water, and shake it left and right to shake out the bubbles in the filter element.
2. Place the filter element, filter the water once and fill the filter partition.
3. Pour out the filtered water and filter it again. The filtered water cannot be drunk directly this time.
4. Through the above three steps, the filter element is activated, and then the water filtered for the third time can be directly drunk.
[Shy R] When activated, you may see black powder precipitation, which is activated carbon. It doesn't matter. I usually filter powder the first time I see it. Take out the filter element and clean it. If there is activated carbon powder at the bottom of the filter pot, I will take it out again. Anyway, where there is powder, I will wash it. In this way, there is basically no activated carbon powder at the bottom of the third filter pot. [Blow a kiss R] And the activation method I said only means that every new filter element needs to be activated, not every time it is used, but every time it is used. Who needs to use it? It's so troublesome [laughing and crying R]
[Ao R] There is a start button on the cover, which must be pressed for a long time. This is a timer, which should drop one grid every week until it is completed in one month, reminding you that it is time to change the filter element. [proud R][ proud R][ proud R]
Friendly reminder, because our direct drinking water equipment is still there, I used brita to filter the direct drinking water and drink it directly. But if it is direct tap water filtration, I suggest boiling before drinking, because some bacteria in water need to be killed at high temperature, while activated carbon filtration is more about impurities, metals and floating objects. If you drink it, it's better to boil it. It's the same as the direct drinking water at home, but with silver. ! !
[Shy R][ Shy R][ Shy R] Follow-up-I bought a water storage bucket myself because I thought too much. I want to use filtered water when washing my hair or taking a bath. Ha ha ha ha, I think using better water will make my skin better. The frequency of use of this filter element is changed once a month, which is the official and corporate statement. I think it should be promoting consumption. If you just drink water, I think the filter can be replaced in two months or one and a half months, depending on the number of people drinking water at home and the situation of drinking water. My husband is like a beverage machine in our house. He likes to drink, and it seems that I am the only one drinking water at home. Ha ha ha ha ha ha, so I wash my face directly with filtered water in the shower and change it once a month! ! ! This is my personal reality, but it's not expensive once a month anyway, just dozens of filter elements. For the sake of health, this is still willing! ! !
[yum R][ yum R][ yum R] activated carbon-I have seen many friends say that sometimes black activated carbon will come out and become a used black hole. I looked up the relevant information. Activated carbon is mainly made of shell and sawdust through carbonization, activation and refining. It has the characteristics of large specific surface area, high strength, uniform particle size, developed pore structure and strong adsorption performance. It can effectively adsorb free chlorine, phenol, sulfur, oil, colloid, pesticide residues and other organic pollution in water, and recover organic solvents. In the design of the filter pot and the design of the filter element, I think a small amount of leakage of the activated carbon must be a value within a safe range. Activated carbon, the raw material itself, is actually very safe. If it leaks within a certain range, we will definitely eat by mistake. I think a professional manufacturer like brita must have thought of this, otherwise such products could not be accepted and liked by so many picky consumers. Therefore, a small amount of activated carbon is harmless to human body. Some friends say that activated carbon will die if eaten [Meng Mengda R][ Meng Mengda R] Here, what I want to say is that a lot of activated carbon will definitely die [Laughter]. Finally, [Meng Mengda R] [