As a high-tech numerical control mechanical equipment, the panel furniture production line cutting machine is playing an increasingly important role in the current panel furniture production line. It can cut, blank and punch various plates quickly and efficiently. It integrates the advantages of traditional woodworking machinery and equipment. Then, as this kind of high-performance woodworking machinery, how should it be maintained? Wuxi Fuxin CNC cutting machine manufacturer will give you a detailed introduction on this issue here.

1. Whether there are foreign objects on each guide rail, rack and starting point travel switch;

2. Whether the driving belts of the main saw and the auxiliary saw motors are normal;

3. What is the state of the front and rear racks of the saw blade and whether it is normal;

4, the main electrical box and cooling fan dust is clean;

5. Whether the dust in the dust hood below the chainsaw is cleaned;

6. Whether the dust at the joint of the suction pipe is cleaned;

7. What is the state of the front and rear racks of the saw blade, and is it normal?

8. Whether the oil in the triple oil cup of air source is sufficient and whether the guide rail to be lubricated is short of oil;

9. The emergency stop switch is normal;

10, check whether there is dust and foreign matter on each motor radiator;

1 1. Check whether the pressure of each barometer is normal.

The above is the focus of daily maintenance of CNC cutting machine equipment. In daily use, customers should pay attention to reasonable maintenance according to specific conditions, so as to avoid failures and prolong the processing life of equipment.