Aux hot water kettle opening mode: 1. Before adding water, pick up the kettle from the power socket. 2. The amount of water should not be lower than the lowest water level line to prevent dry burning of components, and should not be higher than the highest water level line at most, so as to avoid excessive water and overflow the kettle after boiling water. 3. Fill it with water and cover it, so as not to hurt people by steam after the water is boiled. 4. Insert the power cord plug of the kettle base into the power socket, put the kettle on the base stably, and turn on the power. 5. Turn the switch to make the indicator light on. At this time, the kettle began to work. When the water boils, the power will automatically jump to the off position, and the indicator light will go out, thus cutting off the power. 6, if you want to reheat, you need to wait for 30 seconds, and then toggle the switch, don't forcibly hold down the power switch, so as not to burn out electrical components. 7. For its cleaning, you can wipe it with a wet cloth, but don't wash it in water. 8, often check whether there is scale residue on the filter, if there is, clean up in time, don't use a metal brush to clean up.