Article 1: Model Product Sales Contract Both parties to the contract:
Buyer: _ _ _ _ _ _ _ _, hereinafter referred to as Party A;
Supplier: _ _ _ _ _ _ _ _, hereinafter referred to as Party B. ..
After full consultation between Party A and Party B, this contract is specially concluded for both parties to abide by.
Article 1 Product name, variety, specification and quality
1. Product name, variety and specification: _ _ _ _ _ _. (The brand or trademark of the product shall be indicated)
2. The technical standards (including quality requirements) of products shall be implemented according to the following item ():
(1) According to national standards;
(2) According to ministerial standards;
(3) Technical requirements shall be agreed by both parties.
(The code, number and name of the standard to be implemented must be specified in the contract. For complete sets of products, the quality requirements of accessories should be clearly stipulated in the contract; The inherent quality defects of some products can only be found after installation and operation. Unless otherwise stipulated by the competent department, the conditions and time for raising quality objections should be clearly stated in the contract. For products requiring sampling inspection, the contract shall indicate the sampling standard or sampling method and proportion adopted; After the technical conditions are agreed, if samples need to be sealed, they should be sealed by both parties and kept separately for inspection. )
Article 2 Quantity, unit of measurement and method of measurement of products
1. Product quantity: _ _ _ _ _ _.
2. Unit and method of measurement: _ _ _ _ _ _.
(If the state or competent department has provisions on the measurement method, it shall be implemented according to the provisions of the state or competent department; If there is no provision by the state or the competent department, it shall be agreed by both parties. For mechanical and electrical equipment, when necessary, auxiliary machines, accessories, supporting products, vulnerable spare parts, accessories and installation and repair tools that accompany the main engine should be clearly specified in the contract. For products supplied in complete sets, the scope of complete sets of supply should be defined and a complete set of supply list should be put forward. )
3. Provisions and calculation methods of positive and negative tail difference of product delivery quantity, reasonable increase or decrease clause, natural decrease (increase) in transit: _ _ _ _ _ _.
Article 3 Product packaging standards and supply and recycling of packaging materials
(If the state or the competent business department has technical regulations on product packaging, the technical regulations shall prevail; If there are no technical regulations by the state and the competent business department, it shall be agreed by both parties. The packaging of the products shall be provided by Party B, unless it is provided by Party A as stipulated by the state.
Article 4 Delivery unit, mode of delivery, mode of transportation and place of arrival of products (including special lines and docks).
1. Product delivery unit: _ _ _ _ _ _.
2. The mode of delivery, according to the following item ():
(1) Party B delivers the goods;
(2) Party B's transportation (Party B shall fully consider Party A's requirements and negotiate a reasonable transportation route and mode);
(3) Party A shall deliver the goods by itself.
3. Mode of transportation: _ _ _ _ _ _.
4. Arrival place and receiving unit (or consignee) _ _ _ _ _ _.
(If Party A requests to change the destination or consignee, it shall notify Party B 40 days before the delivery deadline (month or season) stipulated in the contract, so that Party B can make a monthly car (boat) request plan; If it must be escorted by Party A, it shall be clearly stipulated in the contract; During the transportation, loading and unloading of products, Party A and Party B shall go through the replacement procedures in the transportation department according to the relevant regulations, make records, and be signed by both parties to clarify the responsibilities of Party A and Party B and the transportation department. )
Article 5 Time limit for product delivery (delivery)
(Unless otherwise agreed by both parties, the delivery date of the delivered or consigned products shall be subject to the stamp date issued by the carrier department when Party A delivers the products. According to the contract, the delivery date of the products delivered by Party A shall be the delivery date notified by Party B according to the contract. Party B shall give Party A the necessary time on the way in the delivery notice. If the actual delivery or delivery date is earlier or later than the date stipulated in the contract, it shall be deemed as early or late delivery. )
Article 6 Product price settlement and payment for goods.
1. The product price is subject to the following item ():
(1) at the price agreed by both parties;
(2) According to the market price at the place of performance when the contract is concluded;
(3) According to the national price.
(For the national price, during the delivery or delivery period stipulated in the contract, when the state adjusts the price, the price at the time of delivery shall prevail. Overdue delivery, in case of price increase, according to the original price; When the price drops, the new price shall prevail. Late delivery or payment, when the price rises, according to the new price; When the price drops, it shall be executed at the original price. The difference of overdue payment shall be settled separately by both parties, and shall not be offset in the original payment settlement amount. If floating price and negotiation are implemented, the price stipulated in the contract shall prevail. )
2. Settlement of product payment: the settlement of product payment, actually paid freight and miscellaneous fees and other expenses shall be handled in accordance with the provisions of the settlement measures of the People's Bank of China.
(If the settlement is made by collection and acceptance, the contract shall indicate payment by bill or payment by bill. The acceptance period of inspection payment is generally 10 day, starting from the day after the transportation department sends the delivery notice to the receiving unit. If the parties agree in the contract to shorten or extend the inspection period, they shall indicate it in the collection certificate and the bank shall handle it according to its provisions. )
Article 7 Acceptance Methods
(The contract should be clear: 1. Time of acceptance; 2. Acceptance method; 3. Acceptance criteria; 4. Who is responsible for acceptance and testing; 5. After the acceptance dispute, which level is in charge of product quality supervision and inspection institutions for arbitration, etc. )
Article 8 Time and method of raising objections to products
1. If Party A finds that the variety, model, specification, design and quality of the products are not in conformity with the regulations during the acceptance, it shall properly keep them and raise a written objection to Party B within 30 days; During the acceptance period, Party A has the right to refuse to pay the part that does not meet the requirements of the contract. If Party A fails to notify Party B within two years from the date of receiving the subject matter, it shall be deemed that the product meets the requirements.
2. Party A shall not raise any objection if the product quality declines due to improper use, storage and maintenance.
3. After receiving the written objection from the buyer, Party B shall be responsible for handling it within 10 days (unless otherwise agreed or agreed by both parties), otherwise it shall be regarded as a breach of the objection and handling opinions put forward by Party A. ..
(The written objection put forward by Party A shall indicate the contract number, waybill number, car number or ship number, delivery date and arrival date; Description of the product name, model, specification, color, logo, brand, batch number, number, quantity, packaging, inspection method, inspection situation and inspection certificate that do not meet the requirements; Put forward opinions on handling products that do not meet the requirements, and both parties agree on matters that must be explained. )
Article 9 Party B's liability for breach of contract
1. If Party B fails to deliver the goods, Party B shall pay Party A% of the unpaid payment as liquidated damages.
2. If the variety, model, specification, design and quality of the products delivered by Party B do not meet the requirements and Party A agrees to use them, the price shall be determined according to the quality; If Party A cannot use it, Party B shall be responsible for replacement or maintenance according to the specific conditions of the product, and bear the actual expenses paid for maintenance, replacement or return.
3. If Party B has to repair or repackage the products because the packaging does not meet the requirements of the contract, Party B shall be responsible for the repair or repackaging and bear the expenses paid. Where Party A requests compensation for losses but does not request repair or repackaging, Party B shall pay Party A the part of the unqualified package that is lower than the value of the qualified package. If the goods are damaged or lost due to unqualified packaging, Party B shall be responsible for compensation.
4. If Party B fails to deliver the goods on time, it shall pay the liquidated damages for the delayed delivery to Party A according to the regulations of the People's Bank of China on delayed payment, and bear the losses suffered by Party A as a result.
5. If the varieties, models, specifications, colors and quality of the products delivered by Party B in advance and those delivered by Party B in excess do not meet the requirements, Party B shall bear the storage and maintenance expenses actually paid by Party A during the storage period and the losses not caused by improper storage by Party A..
6. If the product is sent to the wrong destination or consignee, Party B shall not only be responsible for sending the product to the wrong destination or consignee as stipulated in the contract, but also bear all the expenses actually paid by Party A and the liquidated damages for overdue delivery.
7. If Party B delivers the goods in advance, Party A can still pay according to the delivery time stipulated in the contract after receiving the goods; If stipulated in the contract, Party A may refuse to receive the goods. If Party B fails to deliver the goods, Party B shall negotiate with Party A before delivery. If Party A still needs it, Party B shall make up for it according to the quantity and bear the responsibility of overdue delivery. If Party A no longer needs it, it shall notify Party B within 15 days after receiving Party B's notice, and go through the cancellation procedures. Failing to reply within the time limit shall be deemed as agreeing to deliver the goods.
Article 10 Party A's liability for breach of contract
1. If Party A returns the goods midway, it shall pay _ _% of the returned amount to Party B as liquidated damages.
(liquidated damages are regarded as damages for breach of contract, but if the agreed liquidated damages are too high or lower than the losses caused, the parties may request the people's court or arbitration institution to reduce or increase them appropriately. )
2. If Party A fails to provide the technical data or packaging materials that should be delivered according to the time and requirements stipulated in the contract, it shall not only postpone the delivery date, but also pay liquidated damages to Party B according to the regulations of the People's Bank of China on deferred payment. If it cannot be provided, it will be returned halfway.
3. If Party A fails to pick up the goods according to the date notified by the supplier or the date stipulated in the contract, Party A shall pay Party B the liquidated damages for late delivery according to the regulations of the People's Bank of China on delayed payment, and bear the actual storage and maintenance expenses paid by Party B..
4. Where Party A makes overdue payment, it shall pay liquidated damages to Party B according to the regulations of the People's Bank of China.
5. If Party A refuses to accept the goods in violation of the contract, it shall bear the losses caused thereby and the fines imposed by the transportation department.
6. If Party A fills in the wrong destination or consignee, or raises a wrong objection to Party B, Party A shall bear the losses suffered by Party B as a result.
Article 1 1 Force Majeure
If either party is unable to perform the contract due to force majeure, it shall promptly notify the other party of the reasons for its inability to perform or its inability to fully perform, so as to reduce the possible losses suffered by the other party. After obtaining the certificate from the relevant authorities, it is allowed to postpone, partially perform or not perform the contract, and may be exempted from the liability for breach of contract in part or in whole according to the circumstances.
Article 12 Others
The liquidated damages, compensation, storage and maintenance fees and various economic losses payable according to the provisions of this contract shall be paid according to the settlement method stipulated by the bank within 10 days after the responsibilities are defined, otherwise it shall be treated as overdue payment. However, neither party may deduct the goods or payment by itself to offset.
In case of any dispute arising from this contract, both parties shall settle it through negotiation in time. If negotiation fails, either party may request the competent business authority for mediation or apply to the Arbitration Commission for arbitration, or directly bring a suit in a people's court.
This contract will take effect on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The original of this contract is in duplicate, one for each party; A copy of this contract appears in the form of _ _ _ _ _ _ _ _ _ _ _
Buyer (Party A) _ _ _ (official seal) and supplier (Party B) _ _ _ _ (official seal)
Legal representative: _ _ _ _ _ (official seal) Legal representative: _ _ _ _ _ _ (official seal)
Date of signing: _ _ _ _ _ _ Date of signing: _ _ _ _ _ _ _
Part II: Sales ContractNo. of sample products: _ _ _ _ _ _
Delivery date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party A: _ _ _ _ _ _ _
Party B: _ _ _ _ _ _
Party A has ordered _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ products.
I. Rights and obligations of both parties
1. Party A guarantees that the software developed by Party B will not be copied, copied or leaked to a third party for use, and will not be disassembled, assembled or disassembled, otherwise Party B will pursue the legal responsibility of Party A..
2. Services and upgrades:
(1) Free upgrade service within one year (from the date of software installation, but Party A shall bear _ _ _ _ _ _% of the travel expenses, calculated on a per-time basis).
(2) When the service responds, the customers from other provinces shall be within 5 days.
(3) After the software is installed, Party B has the obligation to provide centralized training, telephone and email guidance to Party A's operators.
(4) Party B's software is general software, and Party A needs to modify it and carry out secondary development. If the workload is too heavy, another agreement needs to be made as an annex to the contract, and the development fee will be charged separately.
Second, after the expiration of the service fee standard
1. There will be a service charge when upgrading.
2. The service fee is charged at _ _ _ _% of the total contract price every year. Party B will ensure the quality of the software and the normal operation of Party A through a good service system, and the service mode is the same as (2) and (3) of the above services and upgrades.
Three. acceptance criteria
If Party B's software can make Party A run normally, the software is qualified.
Fourth, the settlement method
1. Party A and Party B shall pay _ _ _ _ _ _ _% of the deposit (RMB _ _ _ _ _ _ _) on the same day after confirmation.
2. On the date of Party A's software installation, Party A shall pay _ _ _ _ _ _ _% (RMB _ _ _ _ _ _ _) to Party B..
Verb (short for verb) others
1. This contract is made in duplicate, one for each party, and the technical data provided by Party A must be signed or sealed by both parties.
2. Matters not covered in this contract shall be negotiated by both parties.
3. This contract shall come into effect after being sealed by both parties and signed by the person in charge, and shall have legal effect.
Party A (seal): _ _ _ _ Party B (seal): _ _ _ _ _ _
Representative (signature): _ _ _ _ Representative (signature): _ _ _ _ _ _
Address: _ _ _ _ _ _ Address: _ _ _ _ _ _ _
Tel: _ _ _ _ _ Tel: _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signing place: _ _ _ _ _ Signing place: _ _ _ _ _ _
Part III: Sample Product Sales Contract Seller (Party A): _ _ _ _ _ _
Legal Representative: _ _ _ _ _ _
Tel: _ _ _ _ _ _
Buyer (Party B): _ _ _ _ _ _
Legal Representative: _ _ _ _ _ _
Tel: _ _ _ _ _ _
According to the Contract Law of People's Republic of China (PRC) and relevant laws and regulations, in order to clarify the rights of both parties,
Both parties reached the following agreement through consultation.
Article 1: Subject matter, quantity and price
Product name: _ _ _ _ _ _ _
Quantity: _ _ _ _ _ _
Price: _ _ _ _ _ _
Article 2 Inspection and Quarantine
Both parties shall conduct seed inspection and quarantine in accordance with the inspection and quarantine management measures, regulations and relevant provisions promulgated by the state.
Article 3: Delivery Method and Time Limit
Select the following _ _ _ _ _ _ _ methods to execute:
1. After signing the contract, deliver the goods at the signing place.
2. Party A delivers the goods to the designated place _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
3. Party B shall pick up the goods at the designated place in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
4. Other delivery methods and time limit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 4: Packaging and Transportation
1, the packaging requirement is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
2. Mode of transportation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
3. The transportation expenses shall be borne by Party A..
Article 5: Method and Term of Payment
Select the following _ _ _ _ _ _ _ methods to execute:
1. After the signing of this contract, Party B shall pay the down payment to Party A _ _ _ _ _ _ _ _ _ _ _; After delivery by Party A, Party B shall pay the payment for the goods on _ _ _ _ _ _ _ _ _ _ _ _ _ _. After payment by Party B, Party A shall issue a sales certificate.
2. After the contract is signed, Party B pays the price on the spot at the signing place, and Party A issues the sales certificate.
3. Other payment methods and time limit _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 6: Acceptance
1. Party B shall check and accept the seeds. If the quantity and quality (germination rate, purity and water content) of seeds are found to be inconsistent with the contract,
Objections should be raised within _ _ _ _ days; If the seed purity is found to be inconsistent with the contract, it shall raise an objection within _ _ _ _ _ days, and Party A shall handle it within _ _ _ _ _ _ days.
2. Both parties shall sample the seeds at the same time and seal them separately, and the samples shall be kept until production and harvest.
Article 7: Liability for breach of contract
1. If one party delays delivery (delivery) or pays the price, it shall pay liquidated damages to the other party at _ _ _ _ _% of the delayed price every day.
2. If Party B demands compensation from Party A for the losses caused by the seed quality problems, Party A shall pay compensation.
3. Other liabilities for breach of contract _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Article 8: Settlement of disputes
Disputes arising shall be settled by both parties through consultation; You can also request mediation; Or choose the following _ _ _ _ _ _ _ methods to solve:
1. Submit to the Arbitration Commission for arbitration.
2. Bring a lawsuit to the people's court according to law.
Article 9: This contract shall come into force as of the date of signature (seal) by both parties. For matters not covered, both parties shall sign a supplementary agreement through consultation.
Article 10: This Contract is concluded in the form of _ _ _ _ _ _ _ _ _ _.
Seller (Party A): _ _ _ _ _ _
Legal Representative: _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Buyer (Party B): _ _ _ _ _ _
Legal Representative: _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Article 4: Sales contract of sample products Seller: _ _ _ _ _ _ _ ID number: _ _ _ _ _ _ _ _
Buyer: _ _ _ _ _ _ ID number: _ _ _ _ _ _ _
According to the Contract Law of People's Republic of China (PRC), Measures for the Administration of Second-hand Car Circulation and other relevant laws, regulations and rules, the Buyer and the Seller sign this contract on the basis of equality, voluntariness and consensus.
First, the vehicle situation
Car type number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _; Body color: _ _ _ _ _ _; License plate number: _ _ _ _ _ _; Kilometers traveled: _ _ _ _ _ _; Engine number: _ _ _ _ _ _ _ _ _ _ _; Frame number: _ _ _ _ _ _ _ _ _ _; First time at home: _ _ _ _ _ _ _ _ _ _ _; Vehicle purchase tax payment certificate number: _ _ _ _ _ _ _; Type and validity of vehicle insurance: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Vehicles have the following certificates and spare parts (tick "√" in the box):
□ Original and photocopy of driver's license
□ Purchase tax (fee) certificate
□ Toll receipt
□ Vehicle and vessel use tax mark
□ Quotation certificate (use certificate)
□ Operation certificate
□ Motor vehicle registration certificate
□ spare tire
□ Jack
□ key () handle
3. The buyer shall confirm the current actual condition of the purchased vehicle, and shall not return the vehicle halfway on the grounds of vehicle condition.
4. The seller guarantees that the source of the car is legal, the procedures are complete, true and effective, and bears the legal responsibilities and losses caused by the illegal car and procedures.
Two. Transaction amount and payment method
1. The price of this car is RMB 58,600 (in words: fifty-eight thousand six hundred yuan only). The vehicle transfer fee shall be borne by the buyer.
2. The buyer pays 55,000 yuan on the date of signing this agreement. The seller shall deliver the car to the buyer in time. The remaining price shall be paid in one lump sum after the vehicle is transferred.
Three. Agreement on transfer and related issues
1. The Buyer and the Seller have reached the following understanding on the transfer: On the date of signing this Agreement, the Seller shall actively cooperate with the Buyer to handle the transfer and other related procedures. After the treatment, the buyer pays the remaining price.
2. All traffic accidents, economic disputes, legal responsibilities and traffic violations before the seller delivers the vehicle shall be borne by the original owner. The buyer shall be responsible for all traffic accidents, economic disputes, legal responsibilities and traffic violations after the delivery of the vehicle.
3. After the signing of this agreement, the seller shall eliminate the illegal behavior, and provide all procedures for the vehicle before this date to facilitate the buyer's normal transfer, and the buyer shall complete the transfer of the vehicle within 7 working days after this date.
Fourth, the liability for breach of contract
After signing the 1. agreement, the seller shall actively and timely transfer the ownership of the vehicle to the buyer for possession and use. If the seller delays or refuses to deliver the vehicle without reason within the agreed time, or the vehicle cannot be transferred at the agreed time due to the seller's responsibility, it shall pay _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. If the buyer fails to pay the remaining price within the agreed time, it shall pay _ _ _ _ _ _ _ _ _ _ to the seller.
Verb (abbreviation of verb) supplementary clause
____________________________________________________________________
Jurisdiction of intransitive verbs over disputes
Disputes arising from this agreement shall be under the jurisdiction of the people's court of the buyer's habitual residence.
Seven. When the car is transferred from the owner's name to the buyer's name, the execution of this agreement will be completed after the buyer and the seller complete the handover procedures.
Eight. This agreement is made in duplicate, one for the buyer and one for the seller, and shall come into force after being signed and sealed.
IX. The Supplementary Agreement has the same legal effect as this Agreement.
Buyer: (signature and seal)
Seller: (signature and seal)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Article 5: Sales Contract for Sample Products Party A (Seller): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ID number: _ _ _ _ _ _ _
Party B (Buyer): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ID number: _ _ _ _ _ _ _
Party A owns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. License plate number _ _ _ _ _ _ _ _: engine number _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
1. The price of this car is RMB _ _ _ _ _ _ (in words: _ _ _ _ _ _). After Party A provides all the transfer procedures to Party B, Party B shall pay the car price in one lump sum, and all the expenses required for the transfer shall be borne by Party B. ..
2. Party A shall take full responsibility for the authenticity, legality and validity of the vehicle, and bear the direct economic losses caused to Party B by other factors such as unknown origin and seizure.
3. Party A does not guarantee the quality of the vehicle; The purchase must be approved by Party B's on-site appraisal, and both parties shall not have any objection after the transaction.
4. All matters related to this car before signing the transaction (traffic violation; Unexpected debt disputes, etc. ) shall be borne by Party A. After signing the agreement, all matters (traffic violation; Accidents; Debt disputes, etc. ) Party B shall be responsible for it, which has nothing to do with Party A. ..
This agreement is made in duplicate, one for each party.
7. If one party breaches the contract after signing the contract, the court will make a judgment.
Party A (signature): _ _ _ _ _ _ _
Party B (signature): _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _