When choosing a floor, many people want to choose one that is more resistant to dirt. Generally speaking, everyone thinks that dark floors are more resistant to dirt, while light ones are easy to get dirty. Actually, the dark floor is dirtier. With a little dust, it will appear buried, which is the same as a hidden car. In recent years, gray floors are very popular in Europe and America. It not only does not make public the atmosphere, but also hides the ash best, even if there is small dust on the surface. The white stripe color is not resistant to dirt, but it can hide dirt after adding wood texture to white. Moreover, the white strip floor has a strong three-dimensional effect, giving people the feeling of high-grade wood.

Pale yellow is the closest color to wood. The whole house after paving certainly gives people a fresh feeling and creates a refreshing home space. The floor is easy to be damaged in the decoration process, so we must pay attention to the starting time and order of the floor. Improper installation and operation will lead to some problems in the future application of the floor. In the case of house decoration, unreasonable laying sequence is easy to destroy the floor. So plan the floor in advance.

Before paving the floor, solve the indoor floor first. First, clean it, remove oil stains or dust and sand, and ensure that the road surface is smooth, dry and tidy. Floor raw materials should be stored at room temperature for two days before laying. In order to be waterproof, it can be stored in a naturally ventilated and dry place and protected by plastic film. If the raw material is wet, don't change it, and don't change it after drying. If the natural environment of paving is too wet, epe pearl cotton substrate should be used to ensure the drying of paving, and then the glue should be applied.

When assembling the floor, shrinkage joint should be left, and the floor deformation joint of 1cm should be embedded between the floor and the wall. The gap between floors shall not exceed1mm. When laying floors with high density, each floor shall have a gap of 0.4mm to prevent future deviation. Deformation joints should be left in the middle of the solid wood floor. Wood floor will expand indoor space in wet and cold season, and multi-layer solid wood floor and laminate floor can be spliced. Within 48 hours after the floor is paved-during the curing period, it is necessary to prevent walking and placing hanging objects, and leave enough time for the bonding of floor adhesive. After the floor is paved, don't rush to ventilate indoors or blow dry the super glue with air conditioner, which will make the floor drier and more sensitive. Be sure to let the floor blend in with the indoor temperature and humidity for a while.