Current location - Health Preservation Learning Network - Health preserving recipes - How to clean the sports kettle easily?
How to clean the sports kettle easily?
How to clean the sports kettle easily?

8 tricks make it easy for you to clean the sports kettle.

1. Warm water and detergent

Wash with warm water and detergent, generally detergent or detergent can be used.

Brush with a brush

Most kettles have small openings, so you can use long-handled brushes, such as bottle brushes, to brush the inside and bottom of the kettle. It will be easier to remove the sticky residue and mold from the kettle with a brush, which can't be washed away by flushing alone.

Step 3 don't use cabbage

Generally, the vegetable and melon cloth used for washing dishes will scratch the kettle, but it is easier to hide evil and shelter evil.

The lid should be washed.

When drinking water, the liquid will definitely pass through the suction nozzle. Don't forget to clean it. It is suggested to put some detergent in the kettle, and then press the kettle to let the detergent flow out of the suction nozzle.

5. Wash it every time you use it.

Just as you should clean the glass every time you use it, so should the bicycle kettle. Even if you only drink water, you may leave residue on the suction mouth of the kettle because of sweating or eating, which is easy to get moldy, so rinse it at least once every time.

Do not use strong emulsion.

If you feel the need to use stronger washing AIDS such as bleach, the kettle can almost be thrown into the recycling bin. And if it is not cleaned, it may pollute the kettle.

7. Throw it away.

Although it is cleaned regularly, it is inevitable that the kettle will be used for a long time. If it is found by visual inspection that the dirt inside is not easy to remove, it is almost time to change the kettle.

Step 8 let the water dry

After each washing, remember to open the lid, put it upside down, and let the water dry naturally to avoid mold growth. Never put the lid on the bottle before it is dry.

Main points of purchasing sports kettle

1, the key to "durability" is the material and wall thickness of the pot body.

The sports kettle is made of pure aluminum. As a big country of aluminum products, China has a complete range of products. In terms of material selection, each manufacturer is different. Many domestic kettle brands are marked with pure aluminum with a purity of 99.5%, but this is not the case. Even most manufacturers use recycled aluminum.

Another factor is the wall thickness of the kettle. Generally, the wall thickness of a sports kettle is 0.7 mm. Because it is difficult for ordinary consumers to distinguish the wall thickness of a sports kettle, some manufacturers will opportunistically reduce the wall thickness of the kettle to save materials in order to reduce costs, and some manufacturers even reduce the wall thickness to 0.5 mm An intuitive feeling to judge the wall thickness of the kettle is that if you hold it in your hand, the kettle with reduced thickness will be lighter.

If the aluminum used in the sports kettle is impure, or the wall thickness is cut corners, it is easy to sag, break or even burst due to collision or falling. Generally, the higher the purity of aluminum used for sports kettle, the better the strength and toughness of sports kettle, and the stronger the anti-collision and impact ability. Of course, the better the quality, the higher the cost and price.

2. The key to "safety and reliability" is the inner coating of the sports kettle.

As we all know, excessive intake of aluminum will do great harm to human health. The inner liner coating of the sports kettle solves the isolation problem: the water, juice, milk, coffee and other beverages in the sports kettle are isolated from the aluminum kettle body.

The composition of the inner coating of the kettle sports kettle is more than 20% resin, about 1% additive, and the rest is solvent. The quality and safety of sports kettle is the most important determinant. First of all, the raw materials of the inner coating are safe and will not bring harm to human health. In addition, the spraying quality of the inner coating in the kettle is uniform and firm, reaching the necessary thickness, thus ensuring the reliability of separating the beverage from the aluminum kettle body.

Under the pressure of fierce export competition, in order to reduce costs and increase competitiveness, most domestic manufacturers choose low-priced coating raw materials. Due to the limitation of scale and strength, it is difficult to ensure the spraying quality of the inner coating of sports kettle with their equipment and technology.

The coating of the inner container of the sports kettle must meet the food-grade hygiene requirements. However, due to the lack of supervision and testing, at present, except for a few large manufacturers, almost all the cheap products of interior coatings are flooding the market.

Generally, the lid of a sports kettle is composed of a lid and a gasket. In the process of use, because the general sports kettle is not too hard in quality, the gasket will stick to the spout or even separate from the lid because it is screwed too tightly for a long time, which will bring trouble to use and sometimes lose it, which will affect the repeated use of the kettle.

A good sports kettle adopts secondary injection molding technology, which directly combines the gasket and the cover into one, which not only achieves a good sealing effect, but also fundamentally eliminates the possibility of separation.

The tightness of the nozzle part depends on the degree of coincidence between the cap and the nozzle thread. If the matching degree is not high enough, water leakage may occur during normal use, which brings a lot of inconvenience to use. Many people must have had some unpleasant experiences in this respect.

In addition, the thread edge of spout of almost all sports kettles is sharp. Although scratches on fingers and lips are rare, they still happen occasionally. A good sports kettle will have a more humane processing, that is, the edge of the thread will be made into an arc, thus completely eliminating the possibility of scratching fingers and lips even with a very small probability.