Current location - Health Preservation Learning Network - Health preserving recipes - How to maintain solid wood composite floor
How to maintain solid wood composite floor
After the solid wood composite floor is laid, it should be maintained for at least 24 hours before use, otherwise it will affect the use effect of the solid wood composite floor. Solid wood composite flooring is generally poor in water resistance and should not be wiped with wet cloth or water to avoid losing its luster. In our daily life, we must maintain the solid wood composite floor. The specific measures are as follows: (1) The indoor humidity should not be too high, the floor should be kept dry, bright and clean, and the daily cleaning can be wiped with a wringing cotton mop; In case of stubborn stains, wipe them with neutral detergent first, and then wipe them with a wringing cotton mop. Do not scrub with organic solvents such as acid, alkali or gasoline. (2) Pay attention to avoid scratching the floor by hard objects such as heavy metal sharps, glass bricks and spikes in daily use; Don't expose the floor to open flames, and don't put high-power electric heaters directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; It is absolutely forbidden to flood for a long time. (3) In order to maintain the beauty of the solid wood composite floor and prolong the service life of the paint surface, it is recommended to wax it twice a year. Wipe the floor clean before waxing, then evenly coat the surface with a layer of floor wax, dry it a little and wipe it with a soft cloth until it is smooth and bright. (4) Accidentally flooded a large area or partially soaked in water for a long time. If there is accumulated water, dry it with a dry cloth in time and let it dry naturally. Do not dry or expose to the sun with an electric heater. (5) Exposure to strong sunlight for a long time or sharp rise and fall of indoor temperature may cause premature aging of the paint surface of solid wood composite flooring, which should be avoided as far as possible. (6) If the installation place is temporarily suspended, keep the indoor air circulating, and don't cover it with plastic paper or newspaper, so as to avoid the surface paint film losing its luster after being pasted for a long time. (7) Clean the floor and vacuum regularly to prevent sand or friction dust from accumulating and scratching the floor surface. Insoles can be placed outside the door to avoid bringing sand or abrasive dust indoors. When cleaning the floor at ordinary times, you can wipe it with a wringed cotton mop. Do not try to wipe the floor with a wet mop or corrosive liquid (such as soapy water and gasoline). (8) If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low; If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In humid and sultry weather, you can turn on the air conditioner or electric fan. (9) In order to increase the indoor air humidity in autumn and winter, a humidifier can be used to keep the indoor air humidity at 40%-80%. (10) When moving furniture, don't push or pull it directly on the floor, lift it and move it gently. Furniture that moves frequently can be glued with a layer of rubber at the bottom. Maintenance tip: the cleaning method of special stains is: oil stains, paints and inks can be wiped with special stain removing oil.