What if the shower head falls off?

Life daren xiaotaozi

Answer the Lord with high powder

Pay attention to food, fitness and health,

Consulting became the 2607th fan.

Shower, as one of bathroom hardware, is now used by more and more people, but it is easy to block during use. Once the shower is blocked, it can't be used normally. Then, let's introduce what to do if the shower head falls off, and how to clean the shower head.

What if the shower head falls off?

1. Unscrew the shower head from the steering ball ring, find an O-ring or similar seal to replace it, and then rotate the shower head back to its original position.

2, according to the specifications, choose the appropriate shower hose or faucet and then replace the rubber ring and reinstall. When cleaning the thread of the shower handle, apply special glue for water pipes around it, and then screw the shower back and tighten it to remove excess glue and adhesive tape.

3. Rotate and adjust the shower head. If not, use a screwdriver to open the small round cover in the middle of the shower head, and then rinse it with clear water. You can brush the shower hole with a toothbrush and then install and repair it.

Tips for cleaning the blockage of shower head

1, vinegar bubble

If the shower head is seriously blocked, acidification and dust removal can be used to solve the problem, and white vinegar can be poured into the basin to soak the shower head. The scale in the shower head can be removed by soaking in vinegar for ten minutes.

Step 2 use acupuncture

If the shower head is partially blocked, you can drain water first to see which holes are blocked, and then puncture the impurities in the blocked holes with a needle until there are no impurities in the holes, but be careful not to puncture the shower holes.

Step 3 use lubricants

The shower head can be rusted with lubricant. This lubricant has good affinity and permeability to metals. Leave a protective film on the contact surface between the rusty part and the metal. So the shower won't rust.