Take the kettle and tools to a bright place, observe the kettle roughly, and then use a fruit knife to operate along the gap in the handle of the kettle. When the gap is large, extend it with a hard plastic card to prevent the handle of the kettle from being scratched too much by the knife.

Take off the button and observe carefully to avoid breaking the joint. When the button is removed, parts such as springs will appear. Remove the spring, put other original parts back in place, and then reinstall the kettle according to the reverse procedure of disassembly.

Matters needing attention in the use of electric kettle

Choose the right socket. The plug of electric kettle generally has grounding electrode, and it should be connected to the socket with grounding socket. When in use, the power plug should be completely inserted into the socket. Always keep the power plug, socket, power cord and automatic switch device of electric kettle dry and clean.

Turn off the hot water kettle switch before electrifying. Check the switch of the electric kettle before electrifying to ensure that the power switch is in the off position, so as to avoid the impact current from damaging the machine body and affecting the service life.